|
Thanks. The Bluetooth/Hotwire binding is actually fine in my use case. It sees the Hotwire and connects. However, when it reads the ESC configuration, it fails only on the SPEC RS.
|
Originally Posted by Mahjik
(Post 15416385)
Thanks. The Bluetooth/Hotwire binding is actually fine in my use case. It sees the Hotwire and connects. However, when it reads the ESC configuration, it fails only on the SPEC RS.
|
Originally Posted by Randy_Pike
(Post 15417864)
Are you on the correct model on your radio? What software is on the RS Spec?
What I'm unable to do is to use the Bluetooth option for adjusting the RS SPEC. It works connecting from my work laptop (that, and the Android Hotwire app says there is an update available but fails to apply it). The vehicle drives just fine. I'm just hoping to not rely on my work laptop for adjusting the ESC. Both RS's are version 272. |
Mahjik
Using your laptop, confirm you have the fan option set to 'On' not 'auto'... on the unit you are having a problem with ?? |
Originally Posted by lowspark
(Post 15418032)
Mahjik
Using your laptop, confirm you have the fan option set to 'On' not 'auto'... on the unit you are having a problem with ?? |
Originally Posted by lowspark
(Post 15418032)
Mahjik
Using your laptop, confirm you have the fan option set to 'On' not 'auto'... on the unit you are having a problem with ?? |
Originally Posted by Randy_Pike
(Post 15418409)
The only ESC's with this option will be esc's designed for fan use: RSX, RSX Pro, Rx8's and Rx4's.
|
Hotwire 3 issues
i have a rsx pro running version 272 firmware and when I try to use Bluetooth with my Hotwire it says “unknown error 272” I have an iPhone 7 and spectrum transmitter. This is so frustrating |
Originally Posted by Losi Chaser
(Post 15419252)
RS pro BE also has fan option. Pro BE is not equipped nor mean to run a fan off the EZ port. |
Originally Posted by Randy_Pike
(Post 15420237)
Negative ghost rider, the pattern is full.....
Pro BE is not equipped nor mean to run a fan off the EZ port. |
Will this work with the RS or RX8? Would be really cool to use my phone instead of carrying around the laptop to the track. I kinda sounds like it will work, but not bluetooth. So does that mean there is a cable to connect it to a phone? Or Id need to use a PC still?
|
“Error 272 unknown
i cant get my rsx pro to Bluetooth to my iPhone 7 I run spektrum. This is getting very frustrating. Every time I try and connect I get “unknown error 272”. |
Originally Posted by Mahjik
(Post 15417982)
The ESC works fine and the car drives. My understanding is that the Hotwire should connect regardless if a radio is attached. Is that not true?
What I'm unable to do is to use the Bluetooth option for adjusting the RS SPEC. It works connecting from my work laptop (that, and the Android Hotwire app says there is an update available but fails to apply it). The vehicle drives just fine. I'm just hoping to not rely on my work laptop for adjusting the ESC. Both RS's are version 272. |
Originally Posted by Owl
(Post 15420293)
Will this work with the RS or RX8? Would be really cool to use my phone instead of carrying around the laptop to the track. I kinda sounds like it will work, but not bluetooth. So does that mean there is a cable to connect it to a phone? Or Id need to use a PC still?
|
Originally Posted by Randy_Pike
(Post 15421416)
It depends on the radio. If you're a Futaba for example, the radio must be on and set to the car you're trying to adjust. This is due to Futaba grounding out the radio signal when the receiver doesn't have a signal from the transmitter. You can get around this if you unplug your ESC from the receiver if you chose to do so.
|
| All times are GMT -7. It is currently 01:24 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.