With one Amain account or multiple?

I was not able to re-use it. I had to create a new AMain account (new email address) to use it for the 7PX purchase as I used the code before in November on a different purchase.

I see that the 7PX has an RX signal strength indicator on the main screen ( looking at the manual ). Can you set up an RSSI meter on the telemetry page?

Has anyone had any problems with battery strength and the 7px? I recently purchased one and every time I turn the radio on, the battery voltage drops significantly for a short period of time then pops back up. I figured it was just a boot up thing but I've spoken to several other people who don't have an issue. I figured maybe my battery was weak so I purchased a new one that does the same thing.

I charge the life pack and the first time I turn it on it's fine. The second time its already dropping below 6 volts and going into low voltage alarms. when I check the battery voltage on my iCharger, it reads 6.6v. Any ideas?

I couldn't get the code to work.

RPP sold out, so I ordered from RC Mart. It was $609 with screen protector and shipping. This one comes with two RXs.

Today I get it and it feels heavy. Then I see a charger. It came with a LiFe batt pack.

Anyone Know why the 7PX radio Case has not released yet ????

Power Button Question
 

I got my 7px in and the power button doesn’t seem too click like the display button does. Is this normal or is the unit defective out of the box. I don’t have another to compare against. Thank you in advance.

Buy this case. Hold two radios. Or find a smaller one.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Protek 7PX specific foam insert for their radio cases should be at AMain in about 2 weeks I was told.

Did you guys find a screen protector in your manual? Mine had one in there.

make sure your battery type selection in settings is set correct.

I did, but I crinkled it up and tossed it. Then realized what it was about 30 seconds later. Instant face palm.

It is.

Protek 7PX Foam Insert PTK-8182 is available for the Protek Universal Radio case:


https://www.amainhobbies.com/protek-...k-8182/p715106




If you need the case too:


https://www.amainhobbies.com/protek-...k-8160/p228958

Is there a need for the Futaba CIU-3 USB PC Interface or can everything be programmed through the remote?