Anyone know if you can cut off power switch and solder the two wires together without issue?

Yes you can remove switch .. Id replace with another switch

Thanks.

If you cut the switch off, plug in the battery and see if it powers up.If it doesn't, twist the two wires together and then see if it powers up. Some switches make the circuit or break the circuit. Tekins can run without wires being together. Never tried an LRP.

LRP Flow turns on with the wires cut, and turns off then you connect the wires

just cut the switch off and make sure there are no wires bare to touch anything, you can shrink wrap then ends to be sure.

Thanks will do.