R/C Tech Forums - MKS Servo Thread

Page 4 of 4

« First

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - MKS Servo Thread (https://www.rctech.net/forum/radio-electronics/871778-mks-servo-thread.html)

jersey

10-17-2019 04:14 PM

Quote:

Originally Posted by Goof (Post 15529554)

2.5 like nitro back plate screw

ha I literally just searched this topic today for this answer and just found this. Are you sure I just tried it feels kinda loose putting it in servo but also stock screws feel loose so you might be right.

Goof	10-17-2019 05:12 PM

From Kenny him self

1 Attachment(s)

Click on photo

Mickey_B

10-17-2019 06:53 PM

That’s why I switched over to Savox, did not like having that smaller screw and some buggy’s you can’t run the center diff brace.

lighttravler

10-18-2019 04:46 AM

Looking for mini or micro steering and low profile for throttle Mks.. any other options I’m open to.......This is For a drag car. Thinking about the 550 x5 lx low profile for throttle.

jersey

10-19-2019 09:40 PM

Quote:

Originally Posted by Goof (Post 15529862)

Click on photo

thanks Yea I tried it right when you posted it. Has the same feel as the stock screws. I’m guessing Kenny is the guy that runs mks?
I gotta get some longer ones then engine back plates for this one servo horn.
hitecs are also a different size to. Smaller screw.

thanks again

A7racer

11-28-2019 05:11 PM

Anyone know the difference between the 550 and 599 that'll justify the cost difference? Planning on using for 1/8 buggy and truggy. Amain has em at a great discount right now and leaning towards the 550 because of the price. Thanks in advance

jersey

03-01-2020 10:23 PM

Has Anyone on here sent a servo back to mks for warranty, I have 2 new servos one of them is giving jitters. Only used it on throttle to break in a engine and starting jittering. Haven’t even raced it. It’s a 550. Can’t seem to find where to ship it to for warranty. No one reply’s to contact us on there site tried couple times. Any help would be appreciated thanks.

Stevie S

03-01-2020 10:32 PM

Quote:

Originally Posted by jersey (Post 15604554)

typical on the potentiometer and the customer service

Mickey_B

03-06-2020 08:13 PM

Quote:

Originally Posted by Stevie S (Post 15604556)

typical on the potentiometer and the customer service

Should have bought a Savox, but hey all the pros run MKS so they must be great.

Stevie S

03-07-2020 05:34 AM

Quote:

Originally Posted by Mickey_B (Post 15607101)

Should have bought a Savox, but hey all the pros run them so they must be great.

Ew on the Savox, the only thing good about them for many is the price point

Norse

03-12-2020 07:52 PM

My MKS low profile servos all have a tiny jitter(much like the LP KoPropo’s while sitting idle, beyond that the performance and durability has been superb.

dodgeguy

11-27-2020 07:27 AM

Quote:

Originally Posted by A7racer (Post 15553380)

I know old thread, i was wondering the same thing. Specs are very close but why such a price difference?

ryandurepo

07-26-2021 01:54 PM

Late response. But difference between 550 vs 599 is electronics. 550 has Chinese electronics and 599 is Japanese. Everything else is same.

Tmachine

11-11-2022 07:57 PM

Quote:

Originally Posted by Mickey_B (Post 15607101)

Should have bought a Savox, but hey all the pros run MKS so they must be great.

I have servo I wanted serviced, any idea who to contact? I reached out to the USA contact via email and no response... any ideas?

All times are GMT -7. It is currently 02:16 AM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page