Originally Posted by Dan.J (Post 14104354)

Thanks, I will look into them. Are there any US sellers of these?

Originally Posted by Josh L (Post 14104089)

That is odd, but I can't imagine it being a servo issue even still.
The BEC should not allow the servo to drain anything past it's maximum output, which is probably 6v.

I feel like your going to find your problem somewhere else within the solder joints or the ESC circuitry it's self.
A friend of mine had a bad post connection to the main board in his ESC and his cut out similar to what your experiencing.
Keep me posted as to what you find. I feel for ya, cause it's really irritating when stuff like this happens. It's like playing the lottery to get a solid setup these days.

Originally Posted by micrors4guy (Post 14104455)

dialed rc hobbies in FL. carries them. I got my black s trigger from them for 13$ shipped.

Originally Posted by micrors4guy (Post 14104457)

I messed with it some more last night. Put the exact same settings that Tebo has on his. (0 drag brake and 11.25* timing were the 2 settings different from what I was running.)I also re-soldered everything, added a glitch buster and shortened the wired on the cap banks for the ESC. i'm not one to bash but i took the car outside and ran a battery that was at 53% down to 13* over the course of 6 mins. Everything seemed to work fine. I will get to the track either tomorrow night or Friday to test there as that is where I will find out for sure.

Originally Posted by Josh L (Post 14105135)

Sweet, maybe you fixed the problem with the reworking of things.
Hope it all goes well and your able to get some racing in without the problems.

Originally Posted by micrors4guy (Post 14106260)

I hope so as well.

Originally Posted by f1o7x9 (Post 14106339)

I had and issues like that and i found out it was my receiver. I change it and no more problems. If the stuff you did dont work trying another receiver. (FYI my receiver was new to)

Originally Posted by micrors4guy (Post 14104455)

dialed rc hobbies in FL. carries them. I got my black s trigger from them for 13$ shipped.

Originally Posted by f1o7x9 (Post 14106447)

I can't find it at the wed side.

Originally Posted by micrors4guy (Post 14106467)

Originally Posted by f1o7x9 (Post 14106508)

Does anybody know if the new 1.2 software is more then just function updates? Or does it help better conection and lest glitching?

Originally Posted by JayL (Post 14107633)

Don't go to 1.2. People having more issues.

Originally Posted by JayL (Post 14107757)

search the thread for user:wrightcs77

I have heard of a few people having this issue with 1.2