|
Originally Posted by rshair
(Post 12704111)
hello, I am using the RS pro now and like the fact that I can use the binding posts and put a small fan there, i run either a 17.5 or mod 10.5 and with a fan there the temps are very good. for this RSX, is it the same? I mean, if I don't use the fan on the top but rather put the fan blowing to the binding posts would it give same effect to cool the esc like the RS pro? i was hoping to put the cap on the top of this RSX esc as i am doing for my RS pro.
is the alu heat sink removable? and can i just cool the esc with a fan blowing to the binding posts? thanks Are you calling the "binding posts" the solder posts? The cap on the RSX is best mounted on the back if possible to keep the leads short. |
Originally Posted by Randy_Pike
(Post 12704361)
The RSX is over kill for a 10.5 and certainly a 17.5.
Are you calling the "binding posts" the solder posts? The cap on the RSX is best mounted on the back if possible to keep the leads short. i mount the cap on my rs pro on the top of the esc, its out of the way and keeps the overall footprint of the esc the same. |
The RS Gen 2 would be a better option for you for the motors you are running. Plastic case will be slightly lighter and there should be no performance difference between the RS Gen2 and the RSX as far as power or otherwise for the motors you are running. The RS Pro is over kill as well and taller and heavier. The RS Gen 2 will meet all your needs.
|
How long ago did they release the hotwire 9.8 and firmware 244?
|
Originally Posted by Wildcat1971
(Post 12694120)
What is the ship date?
|
Randy posted a picture of a packaged one last week, it will be soon im thinking.
|
Originally Posted by BRSracing
(Post 12706638)
How long ago did they release the hotwire 9.8 and firmware 244?
|
by the way,
Randy Pike did an amazing article in VRC mag newest edition! He explains lots of the settings in hotwire from 1/10 scale offroad and touring car to 1/8 scale! check it out! He needs to put this link on Tekin's website! |
Will this ESC work with all the ROC 412 series motors. Wanting to use this in a SCX10.
|
Originally Posted by ballnM3
(Post 12763293)
Will this ESC work with all the ROC 412 series motors. Wanting to use this in a SCX10.
On 2s it's a great scale setup. |
Any hints on the timeframe for this thing? Are we talking weeks or months?
|
just a heads up everyone.....
the day i get my hands on one of these RSX's I'm gonna do a video review...... I'll compare it to my LRP flow works team and the Orion R10 Pro! I'm historically a TEKIN fan....so I'm most likely going to outfit my entire stable with RSX's if my review goes well! |
If:blush::blush::blush::blush:
|
looking forward to it.:nod::D
|
Originally Posted by johnqpublic
(Post 12766336)
Any hints on the timeframe for this thing? Are we talking weeks or months?
Originally Posted by Randy_Pike
(Post 12643634)
an ETA will be given as units are leaving out the door, that's your ETA.
|
| All times are GMT -7. It is currently 02:55 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.