Brushless motor help
#1
I'm in the middle of an electric conversion. I have two motors I'm looking at, they are roughly the same price new. But I found a Hobbywing motor for $50 used. Is the Leopard worth the extra $50 for the immense power it makes?
The power difference is way different but it kind of makes me think one if over rated maybe?? It's going in a LST2 conversion for 6s lipo.
1st is the Leopard 4092 1480kv
Specifications
Max Amps: 115A
Max Volt-age: 23V
Max Power: 4200W
KV(RPM/Volt): 1480KV
Resist-ance: 0.097
No-load Current(15V): 3.8A
Mount-ing hole depth: 7mm
Length of extend Shaft: 20mm
Shaft Diameter(mm):5.0mm
Weight: 492g
Suitable Model: RC Car
2nd is the Hobbywing Xerun 4074 1800kv
90060030
(Blue) 1800
width 42
length 74
shaft diameter 5
max input26V
watts 1300W
The power difference is way different but it kind of makes me think one if over rated maybe?? It's going in a LST2 conversion for 6s lipo.
1st is the Leopard 4092 1480kv
Specifications
Max Amps: 115A
Max Volt-age: 23V
Max Power: 4200W
KV(RPM/Volt): 1480KV
Resist-ance: 0.097
No-load Current(15V): 3.8A
Mount-ing hole depth: 7mm
Length of extend Shaft: 20mm
Shaft Diameter(mm):5.0mm
Weight: 492g
Suitable Model: RC Car
2nd is the Hobbywing Xerun 4074 1800kv
90060030
(Blue) 1800
width 42
length 74
shaft diameter 5
max input26V
watts 1300W
#2
why even post up the "specs"? the only thing that is listed in the same category is the shaft diameter. if its a 50 dollar differance thats quite significant and would go with the cheaper one, 50 dollars can buy a lot.




