Need more brake help please.
05-02-2013 | 05:43 PM
#16
Tech Addict
iTrader: (1)
Joined: Nov 2008
Posts: 650
From: Tampa, FL.
Turn on Tx
Hold down calibration button on esc power switch and switch on esc. Esc will start beeping.
Let go of calibration button
Hold full throttle then press and release calibration button. You will hear two beeps.
Hold full reverse then press and release calibration button. You will hear three beeps.
Now switch off esc. Calibration is complete. With Tx still on, switch on esc and test forward and reverse.
This procedure must be done after you change parameters in the esc through your computer.
Hold down calibration button on esc power switch and switch on esc. Esc will start beeping.
Let go of calibration button
Hold full throttle then press and release calibration button. You will hear two beeps.
Hold full reverse then press and release calibration button. You will hear three beeps.
Now switch off esc. Calibration is complete. With Tx still on, switch on esc and test forward and reverse.
This procedure must be done after you change parameters in the esc through your computer.
05-02-2013 | 06:22 PM
#17
Suspended
Joined: Apr 2013
Posts: 110
From: SouthEast Mi.
http://www.brushlesshobbies.com/LT4-...re-_ep_40.html
theirs a usable link i think.might b good might be ?? Have a good day !
theirs a usable link i think.might b good might be ?? Have a good day !
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
