Tekin RS Gen 2
#1321
Anyone run there esc with out an on/off switch? Is this a problem?
#1323
Sweet, thanks Krio!
#1325
#1326
Tech Master
iTrader: (48)
Esc
Yes that's me. I appreciate your help and everyone's help and input.
I actually did have the plug fixed, or at least I thought the guy fixed it right. I was thinking the same thing about the plug still being the problem. I am going to have it redone and see what happens. The wire was in good shape and soldered an crimped back on when it was fixed. Maybe not done exactly correct.
I actually did have the plug fixed, or at least I thought the guy fixed it right. I was thinking the same thing about the plug still being the problem. I am going to have it redone and see what happens. The wire was in good shape and soldered an crimped back on when it was fixed. Maybe not done exactly correct.
I guess I'll be calling Tekin Monday. 😢
#1329
#1331
I'm doing the best I can with the videos. Learning as I go. I've got a face for radio
#1333
A factory reset can be done by powering up the ESC, holding down both the Mode and Inc buttons at the same time for 4-5 seconds. It will do a light/chime sequence. Once done it's fresh and ready for your settings.