When running the hall sensor test, the blue light doesn't come on. This was the case when I first started having issues with the truck not moving from a stopped position. Almost as If it was a sensor wire issue. I figured it was the sensors in the motor, so I put a new ballistic in with a new sensor wire. Still having the same issue. The hall sensor test is not showing a blue connection. From stop, it sometimes doesn't want to go. When I give it a slight push, it moves and runs fine.

Any thoughts or ideas?

I would call Novak and talk too them before messing with it anymore, sounds like an esc problem, they will know what u should do and worst case you might have too send it in