![]() |
Originally Posted by Danny/SMC
(Post 12244581)
Yes the Revo PL6 for the price per watts is unbeatable and if you hook it up to your PC it's fully adjustable. Been using the Pl8 for a few years and it's very good. Other high quality chargers are the iChargers and Hyperion chargers. Be careful with the super cheap chargers being offered online as typically these are made to be cheap and corners are cut on the boards and components.
|
When will the Factory Spec 7.4V 5000mAh 40C 2S Inboard packs be back in stock? Im about to pre-order 2 packs, just want an idea of when they will ship out. Also can i charge these packs at 10As? Thanks, Josh
|
Originally Posted by george919
(Post 12244664)
Turnigy fatboy is made in the same factory as the pl8 just different graphics and 10 dollars cheaper.
|
Originally Posted by fq06
(Post 12244779)
Ass the balance board and your price goes up $10.
|
Originally Posted by george919
(Post 12244783)
Ya but u get some pretty cool graphics on the charger.
|
Originally Posted by george919
(Post 12244666)
What's the ir in ohms on the race formula 6500 2s?
|
Originally Posted by JoshC90
(Post 12244731)
When will the Factory Spec 7.4V 5000mAh 40C 2S Inboard packs be back in stock? Im about to pre-order 2 packs, just want an idea of when they will ship out. Also can i charge these packs at 10As? Thanks, Josh
|
Originally Posted by Danny/SMC
(Post 12244859)
Hard to specify ohms as this greatly depends on the room and pack temp and what is used to measure it.
|
Originally Posted by george919
(Post 12244867)
Do you have a measure of the ir? Also how do these packs compare with the turnigy nanos? Also will you guys ship to Canada? The current Canada dealer chargers 20$ more than the smc website.
|
Hey Danny, any possibility of getting smaller 14.8v packs? Looking for 4100mah-5500mah. Thanks
|
Yes I do have IR measurements but they are useless as we use the ESR IR meter with a controlled temperature. Unless you own this meter and test at the same temperature we use the data is useless. The IR is lower than the Turnigy packs.
The price on the Canadian site will get updated once supply runs out as we just lowered out price in the US. |
Originally Posted by timannnn6
(Post 12244876)
Hey Danny, any possibility of getting smaller 14.8v packs? Looking for 4100mah-5500mah. Thanks
I've ordered some 5100-40C-4S. Don't want to go to low as the closer you get to using all the packs mAh this should make the pack wear out faster. I know some want to try and use 4200mAh but to me that just seems to close to using all the packs capacity. |
Hi Danny
When do you think we will see shorty lipos go to 5000 mha? Do you see the packs going from 4mm female tubes to 5mm? Thanks, Tim |
Do you have a graph of the discharge curves for any of your batteries? I'm curious to know how much capacity I can use up before coming close to LVC. From using the pack I have I can use 2500 from a 5000 2S pack and still have the voltage at 8.0V.
|
Originally Posted by Danny/SMC
(Post 12231552)
I can guarantee you will have your packs as soon as we get them in.
I would like to check on my buddies order also #2195. Thanks! |
| All times are GMT -7. It is currently 02:36 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.