|
Is anyone running the smc 6500 mah 4s packs ? How are they
|
Originally Posted by Brandonmorris44
(Post 12472667)
Is anyone running the smc 6500 mah 4s packs ? How are they
|
Yea I wanted a couple of those packs but they were out of them
|
......
|
Originally Posted by Brandonmorris44
(Post 12472667)
Is anyone running the smc 6500 mah 4s packs ? How are they
|
Originally Posted by Brandonmorris44
(Post 12472729)
Yea I wanted a couple of those packs but they were out of them
|
Are the 5100 40c 4s packs still in stock
|
|
Posted on his facebook page on the 21st.
We're releasing a 4S-4600mAh-70C hardcase short pack for racers who want to adjust weight distribution or save weight. This pack uses the same low IR cells used in our 4670-2S2P short case 2S pack. This new pack is expected to be in stock on the second week of September. We will submit it to ROAR is sales are strong as the new ROAR Lipo approvals make it a bit more expensive to get new models approved. 4670-4S2P http://www.smc-racing.net/index.php?...product_id=202 |
So I just bought 2 7.4 6500 inboards and 2 14.8 6500 three of them performed great tonight however one of the 2 cells 5minutes in the negative side melted nearly through the case I have not changed anything on the electronics for months and ran the next race with one of my other batteries with no issue I am thinking that possibly there was an internal issue on the ground side just curious what I need to do or if anything will be done as this battery is now just a paper weight
|
Originally Posted by scorpion51503
(Post 12478683)
So I just bought 2 7.4 6500 inboards and 2 14.8 6500 three of them performed great tonight however one of the 2 cells 5minutes in the negative side melted nearly through the case I have not changed anything on the electronics for months and ran the next race with one of my other batteries with no issue I am thinking that possibly there was an internal issue on the ground side just curious what I need to do or if anything will be done as this battery is now just a paper weight
He will probably ask you to send in the bad pack to inspect. |
Originally Posted by WIGMAN
(Post 12475943)
Posted on his facebook page on the 21st.
We're releasing a 4S-4600mAh-70C hardcase short pack for racers who want to adjust weight distribution or save weight. This pack uses the same low IR cells used in our 4670-2S2P short case 2S pack. This new pack is expected to be in stock on the second week of September. We will submit it to ROAR is sales are strong as the new ROAR Lipo approvals make it a bit more expensive to get new models approved. 4670-4S2P http://www.smc-racing.net/index.php?...product_id=202 |
whats the 5100 4s like
to the 6500 4s what run time do you get out the 5100s |
I so want to get an E-Buggy or Truggy so I can experience the 4S lol.. Until then I need to order the 7200 2S from SMC, I'm impressed with the 6500 but I'm timid on the trigger.. Now that I've up'd the current on my RX8 GEN2 from 35 to 60 things may get a little different :) ..
|
Originally Posted by scorpion51503
(Post 12478683)
So I just bought 2 7.4 6500 inboards and 2 14.8 6500 three of them performed great tonight however one of the 2 cells 5minutes in the negative side melted nearly through the case I have not changed anything on the electronics for months and ran the next race with one of my other batteries with no issue I am thinking that possibly there was an internal issue on the ground side just curious what I need to do or if anything will be done as this battery is now just a paper weight
If inboard, did you install fresh solid bullets plugs? Or your using months old plugs? Just asking so you don't melt the case on the other pack. |
| All times are GMT -7. It is currently 02:43 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.