Go Back  R/C Tech Forums > General Forums > Radio and Electronics
Problem with one of my Lipos? >

Problem with one of my Lipos?

Community
Wiki Posts
Search

Problem with one of my Lipos?

Thread Tools
 
Search this Thread
 
Old 09-23-2012 | 09:39 AM
  #1  
Thread Starter
Tech Apprentice
iTrader: (15)
 
Joined: Sep 2012
Posts: 77
Default Problem with one of my Lipos?

Hi,
New on this forum. I have several 2s lipos(5000mah 30c) and all work great. One of them wont go all the way to 8.4v on my charger though like the rest. I tried discharging and then balance charging again, but it still won't go all the way to 8.4 volts so the charger will stop and say"full". Any ideas? Otherwise it seems to work just as good as the rest.

Thanks
headbasher is offline  
Old 09-23-2012 | 07:03 PM
  #2  
Grizzbob's Avatar
Super Moderator
iTrader: (2)
 
Joined: Feb 2002
Posts: 3,076
From: Sand Springs, OK
Default

Sounds like your charger is stopping at a specific mah point, but some packs will take a bit more than the advertised capacity, so if your charger can be adjusted, I'd suggest setting it for a little more(maybe an extra 1000mah above the rated capacity of the pack), & don't worry, the charger should still stop the charge at the right time(as long as it's set in a proper CC/CV LiPo charge mode)....
Grizzbob is offline  
Old 09-23-2012 | 07:39 PM
  #3  
Thread Starter
Tech Apprentice
iTrader: (15)
 
Joined: Sep 2012
Posts: 77
Default

I will give it a try.

Thanks
headbasher is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.