Before reading the whole thread: I wana pick up a used Flow X TC Spec of a LRP Teamdriver here in Germany. Can I flash a different firmware onto it?! I wanna run 4wd Buggy Mod with it...

Thanks! Thats what I wanna know!

What was the last Windows OS that you were able to do that with? I thought it was only possible to update with Windows XP. Has that been posted somewhere? Can someone please link that or make it a sticky at the top. Im sure all users want to know that.

The Flow you can use XP with the Usb Bridge2. I have setup a XP VM for this.
The FlowX can be updated using Win7, 8 and 10 with the USB Bride3.

Guys, I have a problem. Just bought a brand new flow x tc spec. After soldering up every thing, it won't switch on at all. Any ideas?

Hi folks,
I have a problem with calibration, my LRP FLow X offroad lose the calibration setup each time I unplugged the batterie. Each time I plugged a charged lipo I had to recalibrate the speedo.
My setup :
Ko Propo EX-RR, setup with ful EPA (140%) and reverse Th
Flow X offroad without switch
Trinity D3.5 6.5t

I don't find anypost about a calibration losing

Thanks for yours answer

Sounds like a neutral band arming issue Calibrate at 100% epa Only

it’s a common defect

Is there no reverse in Flow X TC Spec?

The standard firmware has no reverse.
you can change the firmware to get the reverse function. you’ll need the usb bridge 3 I believe.

Thank you silden . I do have the USB bridge. Do you mind go through the steps I need to enable this please? I went through the manual but couldn't really find anything.
Thanks.

I believe that it is the Firmware 1.1 reverse firmware . You can find it on LRP.cc and it includes a pdf with correct steps.
It is on the page of the esc under service > software update

HV Lipo on FlowX
 

Hi folks,
does anyone can tell if it is possible to run FlowX esc with lipo hv?
It seems I should modify at least the cutoff voltage, but I can't find this setting on the manual.
Thank you in advance for any help

There's no change to the ESC when running LiHV. The cutoff voltage is the same.