New LRP Flow Esc
#136
Tech Regular
Is the firmware that comes installed on the Flow Works the most up to date at the moment?
Has anyone a good set of settings for 10.5 boosted indoors on carpet?
Has anyone a good set of settings for 10.5 boosted indoors on carpet?
#137
Tech Apprentice
Does anyone out there have been running the Flow with Thunder Power motor? I have been running Lrp Sxx V2 before but seems like the speedo not running very well with Thunder Power motor. The previous speedo just works well with LRP motor i guess. Pls advise if anyone have any experience with the Flow running Thunder Power motor.
#138
Tech Initiate
Can i use it on a 1/12 without a lipo receiver or a booster voltage? I know that in the manual lrp tell that he need this things but in other forum there are some people that use it without.
Have someone try?
Have someone try?
#139
#141
Tech Initiate
#142
Tech Regular
Is this ESC not yet ROAR approved? Doesn't seem to be on the list as of yet....
#143
Has any body got a good starting point for running a thunder power 13.5?
#144
Hi spencer, I'll message you my settings in the morning.
Luke
Luke
#146
Thanks luke
#148
Tech Adept
booster or reciever pack or none
Ive ran both my cars a 1/12th and a wgt10 with any form of booster or receiver pack and both cars work ok.
But near the end of a run you find the servo slows down and was losing a second a lap in last 60 seconds .
Have now fitted an RCDYNAMICS booster to both. HTH
But near the end of a run you find the servo slows down and was losing a second a lap in last 60 seconds .
Have now fitted an RCDYNAMICS booster to both. HTH
#149
Tech Apprentice
#150
Tech Regular