stupid question maybe, but i need to know.

no. well yes, kinda...

but it wont work if both radios are on at the same time.

i've also wondered this so that when i pick up another tx i can bind both of them to all my receivers and just use whichever tx i want and let a friend or my wife use the other.

Once you bind a receiver to a radio that is the ONLY radio it will recognize until you bind it to a different one. So no....

I know the Traxxas TQ 2.4GHz w/Traxxas Link will do this. It says so on their site.

"Up to 20 Traxxas Link enabled receivers and 20 Traxxas TQ 2.4GHz High Output transmitters can be cross bound together making it possible to grab ANY transmitter and ANY vehicle from the group, switch them on, and start driving."

Forgot about that, they are the exception to the rule however....

Bumping an old thread.

So my question is can you bind 2 receivers simultaneously to 1 radio?


So with some of the cheaper 2.4 radios, you insert the bind plug in the receiver watching for flashing light. Then holding down the Set button on the radio and turn on the radio and let go of set button. And presto its bound.

So if you set up to receivers get them both blinking would the same hold true?


Momo

yes you can, I have 6 bound to one radio, and have a profile for each in memory of the radio. The problem I see with the earlier premise is this, If 2 transmitters could be bound to a rec? How are you going to tell it not to jump to the other or any other transmitter while you are racing or running with other people or even a wifi signal. This is why you want a very quality system like spektrum or futaba fasst, or hitec or airtronics. Thats your best girl and you don't want her cheating with any one. Choose a highend radio and learn how to use it. Using traxxas stock radio or losi stock radio is not getting much. Ask someone you know and trust to use their radio in an open place and feel the control diff. I personelly am still learning the 3pk,what a nice radio.