I am currently running my Blitz in the Short Course Mod and Short Course Super Stock classes. I have a novac havoc pro ballistic 10.5t for the Mod and the same motor in a 13.5 for the Super Stock. I have just been running the 13.5 in both classes because there isn't enough time to de-solder and re-solder the connections in the 1 race gap between the two classes. I am wondering if it would be alright to use the single wire connectors for each of the three motor wires so I can just pull the two motor screws, pull the wires, and vice versa to swap motors between races. Any advice would be much appreciated.

Sure why not! just use some bullet connectors!

Jay

+1 on bullets.

Just make sure you shrink wrap them so they don't short out on each other.

Yes it works great thats what i do

Awesome, thanks for all the replies. I will be putting those on before the next races!

Bullets are the way to go. 2 screws and your motor is out. But DO NOT forget to heatshrink the bullets. Or you will have a problem.