Can some one explain how the motor run in system works as it never seems to work properly. Please note I am not using a run in stand

What settings are folk using for the IB42's & GP43's ?

which are you preferring for 12th scale?

New to Pro trak
 

Hi all i got myself a protrak v10.47 of that aucton site yesterday and was just wondering if i'm setting things up right on the new charger, i usually use a pulsar comp 2 with the following seettings,
cells gp33's
charge current 6a
cut off 0.10v as i understand it 10 milli volts

on the pro trak is this read as 0.10 or 0.01

sorry if this seems like a stupid question but don't want to get it wrong for obvious reasons.
Also what settings are people using for charging/discharging gp 37's and ib42's and ib42 wc's. Loving all the functions on the new charger just can't wait to properly understand them :D
thanks in advance Boosta

0.01 to 0.04 for metals

I'm using 6amps to 45c with safey delta fallback @ 0.3

see Pro-Trak Temp Charging for more info

thanks for that radio_car_racer so just to confirm 10 milli volts would read as 0.10 and 30 milli volts would read as 0.30 ?
once again sorry if this is a stupid question but don't want to ruin my cells!!! :D
and i'm getting a little confused at the mo!!!

No, 0.10 would be 100 (one hundred) millivolts, there are 1000 (one thousand) millivots in a volt.

thanks for clearing that up sosidge 0.01 it is then got there in the end !! :lol:

any suggestions on settings for charging gp33's,37's and ib 42 shv's and wc's?
if poss can you put the figures as they are displayed on the charger (protrak)

Linear charge, 5A for the GP's, 6A for the IB's, 0.03 delta, don't use the lockout, don't use step charge.

excellent cheers fella, use the same cutoff for all? i was using .01 for my gp's up till now will try .03 tonight and see how they go :cool:

Pro-Trak Repairs
 

I've got a Pro-Trak charger that needs repairs. [email protected] is listed as the email address on the web site but it's been several days and I haven't received a response. Does anyone know if that's the right email address? Thanks.

yep that's it I e-mailed them about a 3 weeks ago took a couple days but they got back to me. :nod:

almost 1 year since a post

have these chargers gone out of production?

Also now, this product is available. Charge of a lipo battery is supported in the newest version. Visit their webpage for more detail.

http://www.pro-trak.co.uk/

Keep getting the following error @ the end of discharge when using Pro-Trak Monitor 10.70. See attachment. All's OK @ end of charge.

any ideas?

is there a newer version of the software?

will have LiPo rom soon. Will this software still graph?