|
HW V3.1 1S firmware update failed
I have just tried to update the firmware on a HW Xerun V3.1 1S ESC to the latest “V3.2_140627_Beta”, and midway through the update an error occurred and the update failed. Now, the ESC will switch on, but do nothing else (it won't even turn off again via the switch).
Neither the USB Link software nor the program box will detect the ESC at all, and it doesn't respond to throttle/brake inputs, and won't calibrate. The ESC was working OK before I attempted to update the firmware. I own several HW ESC's, and have done many updates, and this is the first that has failed, but I am still seriously unimpressed with this. I have only just bought the ESC (used), and I now have to contact the previous owner for the original purchase details to see if I can even get it repaired/replaced in the UK under warranty. :mad: |
Originally Posted by Toon
(Post 13647324)
I have just tried to update the firmware on a HW Xerun V3.1 1S ESC to the latest “V3.2_140627_Beta”, and midway through the update an error occurred and the update failed. Now, the ESC will switch on, but do nothing else (it won't even turn off again via the switch).
Neither the USB Link software nor the program box will detect the ESC at all, and it doesn't respond to throttle/brake inputs, and won't calibrate. The ESC was working OK before I attempted to update the firmware. I own several HW ESC's, and have done many updates, and this is the first that has failed, but I am still seriously unimpressed with this. I have only just bought the ESC (used), and I now have to contact the previous owner for the original purchase details to see if I can even get it repaired/replaced in the UK under warranty. :mad: Can you please give me the warranty code or serial number if you have them and i will sort it out for you dont worry that issue comes under a factory defect . please get me this information sent to [email protected] regards Angelo |
I have a just stock ESC and am having problems with getting the LCD program box to communicate with it at all. How are you supposed to hookup the LCD programm box.
It will not even programm manually it is probably somthing I am doing wrong. My LCD programmer has the latest software which I have read it might be the problem Maybe? Thanks Chris |
Just purchased a xerun 120a v3.1 for mod. Can anyone point me to a good starting setup? Please post up or pm me. thx
|
Originally Posted by Josh-n-ya
(Post 13651167)
Just purchased a xerun 120a v3.1 for mod. Can anyone point me to a good starting setup? Please post up or pm me. thx
|
Originally Posted by JayL
(Post 13651583)
Josh: I'll get Brandons settings for you.
|
I'm having my first race in 17.5 boosted class here by us, anyone want to share a good start up on the V3.1 with V10 motor? New to boost and turbo so I don't want to cook my motor first time out. Running rollout of 32.3
|
Angelo,
Has the latest firmware been sent to ROAR for approval .. I don't see it on the list as of today. Thanks, |
Hello Angelo I have sent you a couple of pm with no response. Please respond soon.
Thanks Chris |
I'd try this rather than PM. I usually get replies inside of 24 hours.
For the poster above looking for mod starting settings feel fre to email me andrewdoherty @ ya ho o .calm AWD |
Upgrade failed
Originally Posted by COBRARACING
(Post 13647959)
Can you please give me the warranty code or serial number if you have them and i will sort it out for you dont worry that issue comes under a factory defect .
please get me this information sent to [email protected] regards Angelo |
Originally Posted by bigcracing
(Post 13666940)
Hello Angelo I have sent you a couple of pm with no response. Please respond soon.
Thanks Chris Email him with your query and you normally get a super fast response use [email protected] |
Without reading all 802 pages, simple question.
Can this esc be used in 1s 1/12 scale? I have one for my TC and love it but all the reading I am doing it doesn't appear you can. Follow up question if the answer is no. Does Hobbywing make an esc for 1s? |
Can you use it for 1s? Yes. But I would recommend the 1s 3.1 far and away over making the 2s work. The built in cap and booster make a very tidy install.
|
Originally Posted by goin2drt
(Post 13667810)
Without reading all 802 pages, simple question.
Can this esc be used in 1s 1/12 scale? I have one for my TC and love it but all the reading I am doing it doesn't appear you can. Follow up question if the answer is no. Does Hobbywing make an esc for 1s? http://www.rcdynamics.co.uk/Booster.html If you're going out and buying an ESC just for 1/12, I'd get the 1s version. If you want an ESC that can also be used in other classes (2s), then boosting the 2s version is a good option (which is how I run mine). |
| All times are GMT -7. It is currently 07:24 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.