|
Originally Posted by hyujmn
(Post 10850437)
Ok, time for an update.
Just tried switching pretty much every part around on the motors. Switched out rotors, switched out sensor boards, switched out sensor cables. I've got basically 2x Revtechs and sensor cables and rotors. I've tried every combination of all the parts. Rotor A with Sensor Board A with Sensor Cable A. Rotor B with Sensor Board A with Sensor Cable A, etc etc etc... Still nothing. It does the same crap as always. Now, I did notice that the first time I fixed it, it had something to do with the sensor cable. Is it possible that I just have absolutely rotten luck and both of the sensor cables I have are faulty? that seems pretty harsh, especially if I just spent the whole night figuring this out... Angelo perhaps send this guy the same software upgrade you sent me. :):) It sounds very similar to my problem, mine uses to stop start and go slow then kick in. Best of luck, and rest assured it's nothing to do with the equipment, I went through the annoying task of double checking everything also. Regards Nathan |
Originally Posted by hyujmn
(Post 10851094)
The problem is that I've taken a known working sensor cable that I've been using on my vta car and it still didn't work. I'll try a few others tonight. Gonna have to borrow some from my brother.
|
Originally Posted by COBRARACING
(Post 10852045)
Send me an email and ill help you [email protected]
|
|
Hobbywing Usb link v3.1 download link gives error 404
is there anywhere else to download this ? V1.64 not works I tried to run it as Admin on Win7 (used to work but not anymore) Cheers |
Originally Posted by yokemad
(Post 10852398)
Hobbywing Usb link v3.1 download link gives error 404
is there anywhere else to download this ? V1.64 not works I tried to run it as Admin on Win7 (used to work but not anymore) Cheers |
1 Attachment(s)
mmmmmm shiny.....:D
|
Cheers Rob. |
Originally Posted by blade072
(Post 10853993)
mmmmmm shiny.....:D
|
Originally Posted by kermit
(Post 10854276)
Please share :nod:
|
v3 modified settings
hi guys,
i am running 4.5T thundepower motor in modified. got the new v3. any tips on settings? there seems to be a "default modified" programm set on the speedo? is that safe to use. or do you guys change stuff. //edit: found it. thx. i will stay with default settings and a 8 FDR for starters. |
|
Originally Posted by artwork
(Post 10848547)
Cobra-
Can you please provide some insight here...is there settings that can be changed to improve the feel of drag brake? The issue is not much about how much, but more about how the drag brake is applied. Thanks... Any comment on the drag brake issue before I sell the V3 and start telling everybody it sucks? |
Originally Posted by vitomon
(Post 10854365)
hi guys,
i am running 4.5T thundepower motor in modified. got the new v3. any tips on settings? there seems to be a "default modified" programm set on the speedo? is that safe to use. or do you guys change stuff. //edit: found it. thx. i will stay with default settings and a 8 FDR for starters. I have, with help from a mate, changed the Boost settings and added Turbo. Here is a link to download the PDF setupsheet(the file was to big to upload): https://dl.dropbox.com/u/31035638/4....-%20Odense.pdf On the fast flowing track i tested, the temps were actually the same with the added boost and turbo, as with the standard modified program on 7 min runs. I geared from 8.00-8.30 and the endbell timing from 5-10 deg. The changes gave more power and topspeed, but still had a smooth linear feel. |
Originally Posted by syndr0me
(Post 10854869)
Bump.
Any comment on the drag brake issue before I sell the V3 and start telling everybody it sucks? |
| All times are GMT -7. It is currently 09:26 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.