Originally Posted by defcone (Post 10333883)

SW 930STOCK

FDR 5

4 - DDRS 9

9 - 40°

10 - Fastest/0,1s

12 - 24°

13 - 2000rpm

14 - off

15 - 150rpm/deg


This is a good start setup for Speedpassion 17.5 :nod:

This is what I've been using with great results.

Originally Posted by TeamWTF (Post 10335820)

How you do not melt motors I will never know

Originally Posted by defcone (Post 10333883)

SW 930STOCK

FDR 5

4 - DDRS 9

9 - 40°

10 - Fastest/0,1s

12 - 24°

13 - 2000rpm

14 - off

15 - 150rpm/deg


This is a good start setup for Speedpassion 17.5 :nod:

This is what I've been using with great results.

Originally Posted by TryHard (Post 10334026)

Tom, just load up up 930stock or 119stock.. And then tweak the settings down. That way no need to use a seperate program when switching between stock/mod.

Btw, with a 4.5t I have run this successfully before;

Fdr: 7.8
DDRS: 1
Drag brake: 10%
Initial brake: drag
Boost: 20
Turbo slope: 12
Turbo timing: 10
Boost start: 15k
Turbo delay: 0.1
Boost ACC: 200

For lower rev punch, shorter boost ACC, lower boost start, and more boost in general... The above was for medium traction, high traction I was on boost 28, start 10k, and accl at 100! Super punch!

HiH
Ed

Originally Posted by millbank (Post 10335966)

I have found that the xerun will work with any motor. You just need to adjust the set up accordingly. Not found any motor that is slow when combined with the xerun. Its all about motor timing. Too much timing and you will generate heat. Simples

Originally Posted by defcone (Post 10333883)

SW 930STOCK

FDR 5

4 - DDRS 9

9 - 40°

10 - Fastest/0,1s

12 - 24°

13 - 2000rpm

14 - off

15 - 150rpm/deg


This is a good start setup for Speedpassion 17.5 :nod:

This is what I've been using with great results.

Originally Posted by Andy63 (Post 10336024)

I will try this one. But with higher fdr. I have rum the same with fdr: 5.3 and it didnt have good enough punch.
But i will try it! Thanks!

Originally Posted by defcone (Post 10336041)

What temps are you coming off at?

Originally Posted by Andy63 (Post 10336072)

My temp was about 90 celsius. I had 42 in turbo also.
What temp can the sp motor handle? 17.5T

Originally Posted by TeamWTF (Post 10336086)

I'm curious... What timing do other people run on the V3 motor? I've always cranked it to 10deg and liked that.

Iron Chef Yokomo?

Originally Posted by defcone (Post 10336253)

Max I ever got mine was mid 70's haha. How long is your straight?



It's either max or off. Feels like a different motor when u max it.

Originally Posted by Mild7 (Post 10341064)

Hi all,

I have 120A V2.1 with Speed Passion MMM 13.5, Xray T3, Sorex 36, not a particularly technical track, medium grip, 30m straight.

Looking for a decent if somewhat conservative ESC setup as im returning after a 5 year absence and dont need max speed.

Can anyone make a suggestion? Dont want to cook motors etc.. Running yeah racing twin fans if that helps?

Thanks guys.