|
Originally Posted by SeanV
(Post 8733666)
Something that I find very confusing and I believe it complicates things unnecessary...
The Dynamic and Turbo timing are randomly scattered through out the option menus. E.g As I understand it.. To set Dynamic timing you need to jump between the following options #9 Sets the Dynamic internal timing #13 Sets the Dynamic start RPM timing # 15 Sets the Dynamic Timing Acceleration To set the Turbo Boot Timing We use options #10 , #12 and #14. So, to me it makes a lot more sense to reorganize the options, so that they follow on logically from each other and in effect, they are grouped together. e.g Dynamic timing options are group together to say options #9, #10 and #11 And the Tubo Boot options #12, #13 and #14 Instead of jumping around as it is currently. |
Originally Posted by defcone
(Post 8733678)
+1.
|
Hi All,
What's the best 10.5t sensored motor to be paired with the HW 120A esc ? Im looking for a reliable and cool temp motor.. I'm into touring..thanks... |
Originally Posted by irgo
(Post 8733425)
Angelo where is the missing 1.5°/0.1s and 9°/0.1s ?
1.5/0.1 is so slow, you can then better use more Dynamic timing, instead of turbo boost timing.... 9/0.1, what's the problem, you have 6 and 12, if you want the feel of 9, just add 2 degrees dynamic timing. The other settings, if you really want to use them, what's wrong then with using the 101224 firmware? I'm running it to! 110119 for me was a lot worse then 101224, I will give the new firmware 110211 a try if it comes available. |
Originally Posted by M7H
(Post 8733860)
Irgo, stop nagging and use your brains!
1.5/0.1 is so slow, you can then better use more Dynamic timing, instead of turbo boost timing.... 9/0.1, what's the problem, you have 6 and 12, if you want the feel of 9, just add 2 degrees dynamic timing. The other settings, if you really want to use them, what's wrong then with using the 101224 firmware? I'm running it to! 110119 for me was a lot worse then 101224, I will give the new firmware 110211 a try if it comes available. |
Originally Posted by venom54
(Post 8731009)
Hi Keith,
All the settings are available from either the LCD program box or the PC interface. Below is a guide for 21.5 as used by myself with 119 stock software. Of which you choose from available versions on the LCD box. I will upload a VIDEO to clarify this soon if you still have questions. Settings below for 21.5 as used. Dated 26/02/11. 1 = 1 2 = 0% 3 = 3.4V 4 = 9 5 = 100% 6 = 25% 7 = 0% 8 = 6% 9 = 35 10 = 24 11 = ENABLED 12 = 24 13 = 3000 14 = 0.3SEC 15= 750 Cheers Ren :cool: Thanks for you help but I just got it sorted. I connect to Speedo via Motor checker so no other way to change with this speedo as no program card. But my problem was my DPI setting in windows 7, it was at 110% but I need it at 100% to see all setting on my netbook.. Thanks Keith |
Originally Posted by kschu
(Post 8733872)
110211 oredi available...
|
Originally Posted by Born2Run
(Post 8733900)
Available but where is to download?:o
|
Indeed, but I will not install it until I'm absolutely sure that it will give atleast the same performance as the 101224, or that I can "downgrade" back to 101224, including the 2 in 1 box...
|
Originally Posted by M7H
(Post 8733860)
Irgo, stop nagging and use your brains!
1.5/0.1 is so slow, you can then better use more Dynamic timing, instead of turbo boost timing.... 9/0.1, what's the problem, you have 6 and 12, if you want the feel of 9, just add 2 degrees dynamic timing. The other settings, if you really want to use them, what's wrong then with using the 101224 firmware? I'm running it to! 110119 for me was a lot worse then 101224, I will give the new firmware 110211 a try if it comes available. i am not to argue, but i feel a lot cooler when using 1.5°/0.1s and it's different if compared with Boost Acceleration/DMTS Acceleration, because in some cases the timing will not raise when, the Rpm not increasing. instead 1.5°/0.1s Turbo Increment is, unstop able Kick, which is no limit refer to rpm (keep increasing), until defined end timing. and 9°/0.1 is just another option at medium, more option the better. So i am talking complete option and i do think will not disturbed your settings available there. |
Originally Posted by M7H
(Post 8733976)
Indeed, but I will not install it until I'm absolutely sure that it will give atleast the same performance as the 101224, or that I can "downgrade" back to 101224, including the 2 in 1 box...
|
[QUOTE=K_Takuya;8733806]Hi All,
What's the best 10.5t sensored motor to be paired with the HW 120A esc ? Im looking for a reliable and cool temp motor.. I'm into touring..thanks...[/QUOTE Hobbywing 10.5 all the way :lol: http://www.racersinexile.org.uk/105T...0_2750515.aspx Just a plug :sneaky: |
Originally Posted by venom54
(Post 8732355)
If you are updating the ESC firmware and settings you will have to have the ESC connected to a power supply (battery) and be switched on to see the settings and reconfigure as well as to update the software versions.
I'll be placing video and pics showing this soon. Unless someone beats me to this ! Cheers Ren :cool: http://www.youtube.com/watch?v=bUKMoGvRJZY http://www.youtube.com/watch?v=iOCFkCwBlrQ |
Hi Guys
I have just removed the instructions and will not be loading them again as i have been told via email through hobbywing head office that they have received emails that the new instructions are confusing some end users . Im sorry that i have confused people i just thought maybe that most of you wanted the easy way out with a straight forward explanation on the words used in the instructions and how the system all works but i guess not . sorry once again regards Angelo |
Originally Posted by irgo
(Post 8734047)
adding it all, will not disturbed your settings my friend,
Originally Posted by zamrioo2
(Post 8734064)
M7... what is your finding motor temp compare with 1224 and 119 ver...? i found that 119 give lower motor temp at at least 5'c with same speed... that why i think 119 will give more speed if the temp is about the same...
Also motor temps where much lower. With a LRP X11, the 101224 does not have this strong performance... then maybe 110119 will be better, I don't know. Maybe it's the frequency the ESC is cutting the 3 phases, which suits the X12 better? With a GM, you can set this frequency. And I guess there is a reason for that... |
| All times are GMT -7. It is currently 07:48 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.