R/C Tech Forums - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE

- - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE (https://www.rctech.net/forum/radio-electronics/393690-new-hobbywing-stock-supercharged-software.html)

Tabushi

02-28-2011 09:54 AM

Guys

I just received my Xtreme Stock ESC + 8.5t sensored motor from Hobbywing. I will be racing 8.5t stock class.

So, can you give me tips about how to find, install and use STOCK software (i think 508 version is the one that let one led blinking showing no timing no turbo are being used.

ps : - On another hand, i need tips for gearing. Usually people looks for 6.5 FDR on 8.5t stock, but i know this torquey 4.000kv motors can be geared stronger, maybe a 5.8-6.2 FDR is a good option to start ?

thanks !!

2 Bar Boost

02-28-2011 10:25 AM

Hi,has any one run a LRP x12 17.5t with the new software?Ran mine on Sunday but it came of at 105deg. C.

Thanks

rbakker

02-28-2011 10:38 AM

Quote:

Originally Posted by 2 Bar Boost (Post 8723136)

Hi,has any one run a LRP x12 17.5t with the new software?Ran mine on Sunday but it came of at 105deg. C.

Thanks

The LRP has a lot off timing on the motor...not good for dynamic esc`s

RossoTorro

02-28-2011 10:48 AM

Posted this in the ezrun thread, but no reply.
Know this is not Xerun related but will give it a try none the less...

Quote:

Originally Posted by RossoTorro (Post 8716193)

I got a few Ezrun 35A V2 13T systems, and love them!
But after trying them with advanced LCD card like used with Xerun, i found one was listed as V2.1 or something. It also had different software.
What is the difference between V2 and V2.1?

Is there any updates on software about to come?

2 Bar Boost

02-28-2011 10:51 AM

I've put the 4 dot insert in, that brings the timing down by -10 deg. But still comes of hot.

DDRS =level 9
Boost timing =35 deg
Turbo open=12deg/ 0.1 sec
Turbo timing=15 deg
Boost start=6000 rpm
Turbo open delay=0.5 sec
Boost timing acc=350 rpm

Any help? Thanx rBakker. Here is my setting for the LRP x12 17.5.

Thanks

scytherat

02-28-2011 11:59 AM

2 bar boost what FDR do you run, what type of car is it in and what sort of track is it used on. From ur settings id put the boost timing acc up to 500rpm, turn ddrs down to 7 and lower boost start by 1000rpm, thats just what id do but other may be more knowledgeable

2 Bar Boost

02-28-2011 01:03 PM

Quote:

Originally Posted by scytherat (Post 8723579)

I run on asphalt track, 1:10 fwd schumi mi3.5, fdr 5.0. The track has two 20 m straights and tight in field.

Thanx

cherry2blost

02-28-2011 02:12 PM

Quote:

Originally Posted by cherry2blost (Post 8716894)

Hi Just to let you know that we have had our first win here in the UK using the 1s Xerun running 0119 FW. And the Hobbywing 10.5T Motor.

Our driver managed to lap the entire field in the A final and the second place was surprise surprise another XERUN 1s Driver, so a first for Team UK and a Second for HW equipment.
A 1-2 for our equipment and congratulations to our Driver, we hope for great things in the upcoming 1/12th Summer Nationals here in the UK.
:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D :D:D:D:D:D:D:D:D:D

Will post settings etc as soon as I receive the race report.

Speedo Settings 119
Drag Brake 0%
Low Voltage Protection None
DDRS Level 8
Max Brake 75%
Intial Brake 0%
Neutral 9% ko radio
Boost Timing 35 Deg
Turbo Opentime 24 Deg 0.1
Overheat On
Turbo Timing 30 Deg
Boost Start 3000 (If you need cooler Temps lower to 2000)
Turbo Open Delay 0.2 sec
Boost Timing 250 RPM

Roll out 53mm

http://www.racersinexile.org.uk/XERU...0_2127148.aspx

:nod:

M7H	02-28-2011 02:48 PM

Quote:

Originally Posted by cherry2blost (Post 8716894)

Boost Start 3000 (If you need cooler Temps lower to 2000)

:confused:

irgo	02-28-2011 03:41 PM

Quote:

Originally Posted by M7H (Post 8724374)

:confused:

i was also thinking the same M7H, :lol:
But no Comment, :rolleyes:

cherry2blost

02-28-2011 03:44 PM

Quote:

Originally Posted by irgo (Post 8724661)

i was also thinking the same M7H, :lol:
But no Comment, :rolleyes:

That was the raw report back from a Pro Driver, his findings were that 2000 ran COOLER than 3000, sorry guys but can only pass on the information as he finds it, What would you have us do LIE ???

Never really anything constructive is there Irgo old buddy, how about you post some of your settings here so we can see how the EXPERT does it eh?

kdempsey

02-28-2011 05:13 PM

Missing some settings..

1 Attachment(s)

Hi,

I seem to be missing some settings from my software, i'v got 119 stock installed on HW 1s 120amp but not getting any of the Boost settings?

See attached screen shot.

Thanks

Keith

defcone

02-28-2011 05:23 PM

Quote:

Originally Posted by kdempsey (Post 8725187)

Hi,

I seem to be missing some settings from my software, i'v got 119 stock installed on HW 1s 120amp but not getting any of the Boost settings?

See attached screen shot.

Thanks

Keith

I can see all the boost settings right there?

venom54

02-28-2011 06:07 PM

Quote:

Originally Posted by defcone (Post 8725257)

I can see all the boost settings right there?

I can see the boost settings as well!

Cheers

Ren
:cool:

http://www.rabhobbies.com.au/images/HBOOST.JPG

sizheng

02-28-2011 06:40 PM

Just back from TITC, happy time with many friends and hobbywing drivers , and ANgelo,you are a nice guy.

Finally we took TQ, A1, A4,A5 in open brushless class which is the battle of ESC factories. For me, A4 is the best work I can do, and I'm very satisfied with the new FW 110211 for this race.Here I would like to share the final settings of my Xerun 120A V2.1.

Motor. Handout SP 11.5 v3 about 5 degree in the endbell.
FDR 6.9
Ddrs 9
Boost 40
Turbo 23
Turbo slope 18/0.1
Turbo delay 0.2
Boost start 4000rpm
Boost punch 300

After 5min race, motor temp lower than 80c.(35c air temp)

Nice!

All times are GMT -7. It is currently 07:19 AM.

Page 228 of 837

228

Show 40 post(s) from this thread on one page