|
wat's it like
Originally Posted by COBRARACING
(Post 8384830)
Guys you are so quick i got to give it to you yes there is something new coming out as we are going from your normal c programming to C++ so many news things coming your way in the new year .
|
Originally Posted by COBRARACING
(Post 8384830)
Guys you are so quick i got to give it to you yes there is something new coming out as we are going from your normal c programming to C++ so many news things coming your way in the new year .
Shawn. |
Originally Posted by Shawn68z
(Post 8387144)
C++ ?? Does nobody ever program in Assembly anymore? Gesh, I must be getting old. Cant wait to see some more development, esp 1S/WGT profiles (Hint HInt)
Shawn. |
Are there coming new tuning parameters...?
Yes or no will do...lol |
Originally Posted by rbakker
(Post 8387724)
Are there coming new tuning parameters...?
Yes or no will do...lol when i get more info i will post it . merry christmas to everyone |
Originally Posted by rbakker
(Post 8387724)
Are there coming new tuning parameters...?
Yes or no will do...lol |
Roy,yes,the new software is under testing here. By now,it works better than 0518 with lower motor temp. And smooth off throttle feeling.
I think it will be available before TITC next Feb. Regards, Sizheng |
perhaps there could be a purple/pink 120A edition? hahaha. Bored of the blue :S
|
Originally Posted by cheapskate.brok
(Post 8389368)
perhaps there could be a purple/pink 120A edition? hahaha. Bored of the blue :S
|
Hey Guys,
I have removed my 1s from its 12th home and put it into a tourer... 2s... I will run it with a 5.5t will the supplied double sided tape (for the heatsink) provide good enough heat conduction? I will also use a fan... Iam thinking of using some sort of heat conductive paste/glue... I dont want to kill this little baby! Anyone had any experience with using the double sided tape? Thanks in advance Phill |
Originally Posted by cheapskate.brok
(Post 8389368)
perhaps there could be a purple/pink 120A edition? hahaha. Bored of the blue :S
|
Originally Posted by TeamWTF
(Post 8391291)
Hey Guys,
I have removed my 1s from its 12th home and put it into a tourer... 2s... I will run it with a 5.5t will the supplied double sided tape (for the heatsink) provide good enough heat conduction? I will also use a fan... Iam thinking of using some sort of heat conductive paste/glue... I dont want to kill this little baby! Anyone had any experience with using the double sided tape? Thanks in advance Phill how would you think to reduce the heat there ? |
Originally Posted by TeamWTF
(Post 8391291)
Hey Guys,
I have removed my 1s from its 12th home and put it into a tourer... 2s... I will run it with a 5.5t will the supplied double sided tape (for the heatsink) provide good enough heat conduction? I will also use a fan... Iam thinking of using some sort of heat conductive paste/glue... I dont want to kill this little baby! Anyone had any experience with using the double sided tape? Thanks in advance Phill ko propo heat transfer double sided tape 45511 I believe lrp also have the same type of tape, as when I had the spx it included the heatsink and tape. I would assume there is no thermal paste with this type of application. edit.....lrp supply scotch 468mp thermal tape to some of their speed controls if a heatsink is to be installed by the user. you can buy this same tape through blackwoods. http://www2.blackwoods.com.au/infoBA...2997&P=2022347 |
Whats the standard software installed in the 1S speedo?
tav |
Originally Posted by retro
(Post 8391764)
Whats the standard software installed in the 1S speedo?
tav |
| All times are GMT -7. It is currently 07:18 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.