I bought this Team associated xp digital Ds1313 servo for my Losi 8ight 1.0 buggy. I have the Losi 2000 lipo battery on my buggy and would like to know if the lipo battery will or wont burn the servo? I have the servo brand new never mounted in the box. I would like to no more about it before i do anything with it. Thanks

that lipo will send that in to flames... you need to get a regulator

Team Losi High Output 5A Lipo Regulator w/Switch
[LOSB9608]

Yea i forgot to say i have the Regulator w/switch

you should be good then.......... the reg WILL reduce the volts to 6 or so..

you will be good.

Where should i use it... On the throttle or the steering? I also have a brand new hitec 7955tg servo. Im going to be using those 2 servo on my losi 1.0 buggy. I also have 2 hitec 7955tg servo on my losi 2.0 buggy which i havent had problem with.

I use the DS1313 in throttle with good results...

Not true it will work without a regulator not recommended but will work, 3 months and no issues with mine

might not work well on your reciever though

I would use the regulator since the servo itself is only rated for 6v. DO NOT run it without the regulator it will burn up and then they will not warranty it because of that. Regulator's are cheaper than new servos.

Im going to use it with the regulator since i have it. Im using the receiver that the Spektrum Dx3s come with in the package.

So should I use the hitec 7955tg for steering And the DS1313 on the throttle?
I'm asking because I don't want the ds1313 to die out on my throttle and have my buggy run away from me.