iraqsucks

iTrader: (11)

ok so the screw that hold my servo horn on, the one that came with it, apparently it came out. bc the horn came off. how do i get another screw for this particular servo? its a jrz590m. please help!!! so i can be again

Duster_360

iTrader: (21)

Only thing a search turns up -

http://www.amainhobbies.com/product_...Horns-w-Screws

Use a serrated or star washer under the screw and/or some blue loctite - keep it from shutting you down again.

Wile E Coyote

iTrader: (7)

aren't those just ordinary 3mm Botton screws? I mean, a hardware store which sells a 3mm x 5mm botton top screws should be a good replacement for it.

Super_Roo

iTrader: (1)

Those are self tapping screws used in plastic servo's. I think he wants these for screws for metal geared JR servos: http://www.jrradios.com/Products/Def...ProdID=JRPA227

Or like Wile E Coyote said just a standard 3mm X 5mm (or 8mm) screw will do.

iraqsucks

iTrader: (11)

i just fixed it. i used a clutch bell screw. worked great, and of course this time i added a little locktite. thanks guys

Graphite07

iTrader: (60)

what color loctite? be careful on that sometimes loctited screws are hard to get back out.might destory the servo horn pole removing it.

iraqsucks

iTrader: (11)

why blue of course