Community
Wiki Posts
Search

Bad luck with Novak

Thread Tools
 
Search this Thread
 
Old 10-08-2009 | 10:03 AM
  #1  
Jackster's Avatar
Thread Starter
Tech Addict
iTrader: (19)
 
Joined: Aug 2009
Posts: 646
From: Northern VA
Default Bad luck with Novak

Ok, I apologize for making it seem like Novaks are junk. I just got highly frustrated after having purchased not one, but 2 problem ESCs. I now know that buying used is, indeed, a risky undertaking and I won't do it again.

Last edited by Jackster; 10-10-2009 at 11:38 AM.
Jackster is offline  
Old 10-08-2009 | 02:03 PM
  #2  
wiscnitro's Avatar
Tech Addict
iTrader: (22)
 
Joined: Nov 2008
Posts: 606
From: Reedsburg,WI
Default

Are you using a Novak Motor? which one and what are your motor temps? sounds like you got a bad motor or someting wrong in the sensor I know the Havoc will thermal at 150* F im not sure about the GTB but the other ESC your using too??? I would contact Novak first before buying another Speedo I know a few racers in VTA that use the GTB and never had a problem and thats all Novak motors
wiscnitro is offline  
Old 10-08-2009 | 04:55 PM
  #3  
Company Representative
 
Joined: Jun 2005
Posts: 2,891
From: SoCal
Default

Originally Posted by Jackster
Am I the only one having super bad luck with Novak ESCs? I had a GTB and now an XBR and nothing, including gearing, would prevent them from constant thermals. I am so frustrated right now. I will never buy another stupid Novak.
Novak has a tech support team that would be more than willing to assist you with your problems. Because I am not part of Novak's technical support group, I suggest that you email [email protected] with your question. Before emailing, take a moment to review the instructions originally included with your Novak Item:

Novak Instruction Downloads

Please make your initial email as detailed as possible. Include:

~ warranty claim?
~ speed control (brand/model)
~ motor (brand/wind)
~ connectors used
~ servo (brand/model)
~ radio system (receiver/transmitter)
~ vehicle & gearing
~ battery, brand (c rating/capacity)
~ any external modules (BEC/brand, Glitch Buster)
~ other important info: water damage, corrosive chemical sprays, excess heat, etc

The more information you provide in your first email, the more quickly tech support can offer you assistance.
NovakTwo is offline  
Old 10-08-2009 | 05:13 PM
  #4  
GLwagon's Avatar
Tech Master
iTrader: (22)
 
Joined: Jun 2007
Posts: 1,282
From: Baraboo
Default

Originally Posted by Jackster
Am I the only one having super bad luck with Novak ESCs?
Just be glad your GTB didn't shoot flames while sitting on a work bench, once out of warranty.

What wind of motor on the GTB at the time, & working fan?

I have a couple that are running great, & hopefully don't fail randomly.
GLwagon is offline  
Old 10-08-2009 | 07:42 PM
  #5  
Jackster's Avatar
Thread Starter
Tech Addict
iTrader: (19)
 
Joined: Aug 2009
Posts: 646
From: Northern VA
Default

Of course it's long out of warranty. I was using a 13.5EX with a Novak fan on the ESC and an Integy on the motor. This really REALLY effing sucks. I bought the package on here and just got it a few days ago and now this. It's the 2nd second hand system I've bought on here and have had problems with.
Jackster is offline  
Old 10-08-2009 | 07:49 PM
  #6  
Tech Elite
iTrader: (23)
 
Joined: Feb 2008
Posts: 2,731
From: Upper Milwaukee
Default

ive heated my gtb up easily with a 8.5. its got pretty warm running 30 minutes. no problems though.
not home is offline  
Old 10-08-2009 | 07:58 PM
  #7  
Jackster's Avatar
Thread Starter
Tech Addict
iTrader: (19)
 
Joined: Aug 2009
Posts: 646
From: Northern VA
Default

Well I just sent them an email, so hopefully they'll respond with something positive. BTW, I was running a 76 spur with a 19 pinion this last time if it matters.

Last edited by Jackster; 10-08-2009 at 09:12 PM.
Jackster is offline  
Old 10-09-2009 | 07:56 AM
  #8  
racer1812's Avatar
Super Moderator
iTrader: (31)
 
Joined: Nov 2008
Posts: 15,743
From: RIP 'Chopper', 4/18/13 miss you bud:(
Default

Originally Posted by Jackster
Well I just sent them an email, so hopefully they'll respond with something positive. BTW, I was running a 76 spur with a 19 pinion this last time if it matters.
What vehicle? What temps~motor/esc?
racer1812 is offline  
Old 10-09-2009 | 07:57 AM
  #9  
Jackster's Avatar
Thread Starter
Tech Addict
iTrader: (19)
 
Joined: Aug 2009
Posts: 646
From: Northern VA
Default

TC4
Jackster is offline  
Old 10-09-2009 | 08:05 AM
  #10  
racer1812's Avatar
Super Moderator
iTrader: (31)
 
Joined: Nov 2008
Posts: 15,743
From: RIP 'Chopper', 4/18/13 miss you bud:(
Default

Hmmm. after 20 years and just as many Novak speedos I've only had one go bad. Sorry about your bad luck but I'll still buy the orange stuff.
racer1812 is offline  
Old 10-09-2009 | 08:11 AM
  #11  
Jackster's Avatar
Thread Starter
Tech Addict
iTrader: (19)
 
Joined: Aug 2009
Posts: 646
From: Northern VA
Default

That's great! I am really happy that you haven't had trouble with any of yours.
Jackster is offline  
Old 10-09-2009 | 08:18 AM
  #12  
racer1812's Avatar
Super Moderator
iTrader: (31)
 
Joined: Nov 2008
Posts: 15,743
From: RIP 'Chopper', 4/18/13 miss you bud:(
Default

Wasn't being a dink but don't slam Novak because you bought 2 esc's used and both are bad.....I had a XBR let the smoke out after 3 min of use, it happens to all of em' Novak, Tekin, CC, LRP.........
racer1812 is offline  
Old 10-09-2009 | 08:39 PM
  #13  
Jackster's Avatar
Thread Starter
Tech Addict
iTrader: (19)
 
Joined: Aug 2009
Posts: 646
From: Northern VA
Default

Well they said they would look at it as a warranty issue for me so if they are willing to do that I might be more likely to buy another if it works out. I just don't understand why something would do that after less than 5 minutes of run time. It's clearly NOT normal. I don't care what kind of system it is.
Jackster is offline  
Old 10-09-2009 | 09:37 PM
  #14  
dgdcustoms's Avatar
Tech Master
iTrader: (85)
 
Joined: Jan 2009
Posts: 1,838
From: Sioux city, IA
Default

when I had to send one of my GTBs in for warranty work, I got a brand new one back and a paper that stated it burnt up from a KNOWN mosfet problem. That didnt make me feal very good about them any more.So I sold the new one and my older one and got some Tekins. I have not had one problem with Tekin. Just my two cent worth...
dgdcustoms is offline  
Old 10-10-2009 | 05:22 AM
  #15  
Jackster's Avatar
Thread Starter
Tech Addict
iTrader: (19)
 
Joined: Aug 2009
Posts: 646
From: Northern VA
Default

Thanks- that was my next course of action. Tekin has AWESOME deals for servicemembers. I was just trying to save a couple bucks by buying used. Maybe that was my problem.
Jackster is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.