My son bought a Associated B4 as a roller. He has put what he thinks he wants in it. I just want to make sure that he does not burn it up or something stupid.
Seems to me that he may need a regulator or a cut off or something.
Here is what it has in it:

Raido is a : JR xs3 pro
receiver is: JR RS310
ESC is: Quantum 2 competition
Servo is: HiTec 645 MG
Motor: 19 turn
Battery is: SMC c-max lipo 7.4 5200mAh

Thankx.

Your going to want to put a lipo cut on there or be really careful about letting the batter get low. Lipo's dont want to get under 3v per cell.

--pakk

Def need a low voltage cutoff added like a novak smart stop. I wouldn't trust being able to run just a certain amount of time unless he is racing where time is regulated. Its too easy to ruin a lipo that way. They are not very forgiving about being overdischarged.

Thankx guys for all the help.

Off to the RC store it is.

Thankx Again.