here's the combo I think I'm going to get
http://cgi.ebay.com/eZrun-RC-1-10-12...3A1%7C294%3A50
Great price and the esc can handle lower turn motors than the Novak Havoc and the Lrp Ai Reverse that I was looking at

I think you are going to be very happy with your new setup.

Jay

150a ezrun problems
 

hi LUTACH
ive had problems with my ezrun setup im running a 150a esc and a 2350kv ezrun motor with 2 5400 2 cell lipos 28c anyway the firts one fried the motor and speedy within 3 charges i sent it back and they said the speedy had a problem they sent a new motor and esc this time i notice they set the punch and timming lower and now the 2nd charge it has fried again this time i was 6min into the run and the buggy(hyper9e) lost steering and power i have test the servo seperatly and its fine can u HELP I DONT WANT TO RUN THIS SETUP IF ITS GONG TO HAPPEN AGAIN CAN U SUGGEST ANYTHING ANYONE

Have my order on hold and heading towards the 60amp as should be more than enough and of course the 120 amp higher to..forgot about that:(
havent received the truck yet and should be here tomorrow.
should I get the sensored motor and not run the cable or get a non sensored motor? and advantages or disadvantages?when running with the 60amp ecu?
Thanks.

If your going to get your motor from Hobbywing then I would get the sensorless motor if your going with the 60A EZrun ESC. If your going to go with a bigger name brand, Trinity Duo 2 would be my first choice. I have heard nothing but good things about these motors. Don't get me wrong I like the XErun! I wish it was avaible in the states when I bought my EZrun. I just don't know if it's any bigger. What I do KNOW is that the 60Amp EZrun ESC works/fits GREAT in my XXX-4G+ (I'm running the Aurora body BTW)

Jay

Jay,
thanks a lot for that..will order the team powers 4300kv sensorless motor with the 60 amp ecu as also have my eyes on an x5 conversion up for sale..:)

My buddy has an X-5... it's a really sweet ride! He loves it.

Jay

thats cool..seems like they are better in the rough which may be good for our track as its a shared gas 8th scale track. Thanks.

What is it geared at? What surface are you running on? Did you check temps on the motor or ESC during a run before you let the smoke out? Can that ESC handle 4S?

Ordered 2x HobbyWing - B4 Combos (EZRUN 5.5T w/ 60A ESC) and 2x 13.5T BL motors yesterday from HobbyPartz and got them delivered today (they're located an hour away). These will be going in our Slash trucks.

so has anyone tried out the XERun V2 60A esc combo set yet? is it worth the money?

I bought the ESC without a motor so i've been running heaps of different sensored motors with nothing plugged in it makes no difference whether the motor is sensored or not.

There is any changes between EZRUN-4465SL EZRUN-3674SL motors that justify the diference of 80$ ?

Thanks

I was going to use my 60A combo for dual duty but dang after seeing hobbypartz price on the 35A I may just pick one of those up for my RC12L3.

Just put a Ez-run 35 A speedo and ez-run 17.5 combo in my sct and after a couple packs on default speedo settings I can say that for the 70.00 this set-up cost me it is worth it's weight in gold!!

No cogging what so ever.It was geared the same as the LRP/novak system that was in it.was just as fast. The motor ran cooler and the speedo didnt even heat up at all.Motor temp after 10 min. of runtime was 114*F after the first battery, so I went up 3 teeth.Ran for another 10 min. run STILL no cogging, was fast as poop, and the motor temp was 134*F,speedo was still cold as Ice like it didnt even know it was being used!Gotta give it a thumbs up for the money!