GTB question
#1
Do all GTB speed controls have a lipo cutoff built in? If they dont how can I tell if my GTB has it or not. I got this speedo in a trade so I dont know what the package said.
Thanks in advance.
Thanks in advance.
#2
spread spektrum gtb = 100% of them have lipo cutoff
gtb = only the newer ones sold in the last 6-12 months has it.
email novak for the lipo cutoff instructions, u can tell by the lights flashing, too much to type here.
gtb = only the newer ones sold in the last 6-12 months has it.
email novak for the lipo cutoff instructions, u can tell by the lights flashing, too much to type here.
#4
the first gen gtb did not have lipo cut off built in you have to get a separate circuit to shut down the circuit after the voltage drops below 6 volts
here are the lipo cutoff modules http://www.teamnovak.com/products/li...ule/index.html
here is the procedure for the gtb with built in lipo cutoff
lipo safety cutoff
during profile customization press and hold the novak one-touch set-up button until the yellow and red leds turn on simultaneously
ONE BLINK signifies that the safety cut off function is turned off
TWO BLINKS signifies that the safety cutoff is turned on
now when the lipo safety cutoff is enabled at power up the red and yellow leds will blink 3 times in unison to indicate that the cut off is on and active
after the 3 blinks occur the standard red led blue and amber lights will be lit when the cut off occurs the red and yellow lights will toggle
lipo enable disable does not get reset after 1 touch setup that is directly off of the instruction insert i got with my latest gtb
hope that helps brotha
here are the lipo cutoff modules http://www.teamnovak.com/products/li...ule/index.html
here is the procedure for the gtb with built in lipo cutoff
lipo safety cutoff
during profile customization press and hold the novak one-touch set-up button until the yellow and red leds turn on simultaneously
ONE BLINK signifies that the safety cut off function is turned off
TWO BLINKS signifies that the safety cutoff is turned on
now when the lipo safety cutoff is enabled at power up the red and yellow leds will blink 3 times in unison to indicate that the cut off is on and active
after the 3 blinks occur the standard red led blue and amber lights will be lit when the cut off occurs the red and yellow lights will toggle
lipo enable disable does not get reset after 1 touch setup that is directly off of the instruction insert i got with my latest gtb
hope that helps brotha




