![]() |
Nb4
Originally Posted by billdelong
(Post 15875003)
So a beginner level racer recently showed up to the track with this radio and I've been working with him on his setup and after testing the radio while driving his car, I'm considering making a purchase.
Only thing that has me second guessing the buy is that it doesn't use a percentage to control the steering speed, it goes in increments down to the hundredth of millisecond which is very confusing to me... I realize that this increases precision for the tuning option but adds frustration as I prefer to stick with the industry standard using percentages instead. Does anyone know if the Pro can be flashed backwards to the NB4 firmware which uses percentages? This is the only potential deal breaker for me before I pull the trigger... pun intended, ha! |
M12s on 471 481 and a fs clone vs nb4 on mini rx
Originally Posted by RockinTheCasbah
(Post 15970288)
Has anyone ran the
the pro back to back with the nb4 and noticed a difference in response time ? Did u find any 1 to do back to back with the pro |
Flyksy is as far as i now the only company where you not only have to flash the transmitter, but also have to upgrade the reciver sometimes, maybe this was the issue with yours.
A friend testet his M12 back to back with the Pro, way more precise and he was way more consistent with the Pro |
Originally Posted by mailman81
(Post 16033891)
Flyksy is as far as i now the only company where you not only have to flash the transmitter, but also have to upgrade the reciver sometimes, maybe this was the issue with yours.
A friend testet his M12 back to back with the Pro, way more precise and he was way more consistent with the Pro |
Still have mine and loving it!!!
|
Also interesting that Ryan Maifield elected to use one for the WC. As a pro driver, he MUST have confidence in anything he uses, so that should be a ringing endorsement, considering that it was a personal choice.
|
All Brands require firmware updates to the TX and RX. I have updated both my 7PX and 10PX, M17, NB4, and all My Drone and Heli Transmitter, FrSky Taranis, Radiomaster, Zorro, TX12, TX16S, FrSky Tantem X18. its just the nature of electronics. ESC, CHargers, they all get updates
|
Originally Posted by TurnNBurn
(Post 16034348)
Also interesting that Ryan Maifield elected to use one for the WC. As a pro driver, he MUST have confidence in anything he uses, so that should be a ringing endorsement, considering that it was a personal choice.
|
So for the noble pro experts.
I recently got myself a Pro, as I’m gearing up to come back into the hobby. The kit comes with an FGR4B and an 8 channel also. Would there be any loss in using the FGR4S v2. Using it for 1/10 touring cars |
Nope, it is what most 1/10th guys use both on and off road.
|
Anyone have an issue where when powering on a message is displayed “Resource error, please update transmitter firmware”? I have had this radio about a week and at the first race with it yesterday this started happening. I have been searching everywhere for an answer. I was able to get through the day but it was painful.
what I have found is that removing the battery base and cycling power a few times will usually let it start up normally but when it finally starts all models are erased and it’s factory reset so I have to bind my receivers again. I got through the day by binding receivers and leaving it on after that. I did try updating the firmware and it didn’t help. I have tried both the standard and FCC versions. I have a few weeks before my next race and need to get this figured out. |
Originally Posted by Dhullett80
(Post 16041660)
Anyone have an issue where when powering on a message is displayed “Resource error, please update transmitter firmware”? I have had this radio about a week and at the first race with it yesterday this started happening. I have been searching everywhere for an answer. I was able to get through the day but it was painful.
what I have found is that removing the battery base and cycling power a few times will usually let it start up normally but when it finally starts all models are erased and it’s factory reset so I have to bind my receivers again. I got through the day by binding receivers and leaving it on after that. I did try updating the firmware and it didn’t help. I have tried both the standard and FCC versions. I have a few weeks before my next race and need to get this figured out. Taking the base off and powering it up seemed to work. After that I never used the base to give it power. Just turned on from the switch at the top. Still concerned about it though. |
Mine is being replaced under warranty. FlySky said it sound like a faulty usb port or communication board.
|
Originally Posted by Dhullett80
(Post 16041660)
Anyone have an issue where when powering on a message is displayed “Resource error, please update transmitter firmware”? I have had this radio about a week and at the first race with it yesterday this started happening. I have been searching everywhere for an answer. I was able to get through the day but it was painful.
what I have found is that removing the battery base and cycling power a few times will usually let it start up normally but when it finally starts all models are erased and it’s factory reset so I have to bind my receivers again. I got through the day by binding receivers and leaving it on after that. I did try updating the firmware and it didn’t help. I have tried both the standard and FCC versions. I have a few weeks before my next race and need to get this figured out. |
I was able to contact FlySky support via Facebook group. I talked to chris Kong and he wanted the radio sent back to them for investigation and had the dealer (helidirect) exchange it. I know 20 guys running the NB4 and they have had no issues at all. Chris Kong did say he thinks it’s an issue with the usb port on the base. I’m wondering if they have a bad batch of those pc boards that got out?
I haven’t received my replacement yet because UPS has lost the package 🤦🏻♂️. HeliDirect sent it right out and ups said it was out for delivery a week ago but it was never delivered and now there’s an investigation open to find it or refund my money. I ended up getting a futaba T4PM from a guy at the track to use until this is sorted out. |
| All times are GMT -7. It is currently 06:07 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.