Throttle works, no steering or reverse
06-25-2019 | 11:55 PM
#1
Thread Starter
Tech Rookie
Joined: Jun 2019
Posts: 1
Throttle works, no steering or reverse
Hi guys!
I'm really new to the RC world and have a Traxxas Slash 1/16 4WD that I have bought a new esc to. A Hobbywing Quicrun Brushless 1/16.
I have managed to calibrate it and have throttle, but no steering or reverse.
Any ideas what I could try or look for?
I'm really new to the RC world and have a Traxxas Slash 1/16 4WD that I have bought a new esc to. A Hobbywing Quicrun Brushless 1/16.
I have managed to calibrate it and have throttle, but no steering or reverse.
Any ideas what I could try or look for?
07-01-2019 | 03:46 AM
#2
No steering - check that the servo cable is properly connected to channel 1 on the receiver - nothing else on the ESC should interfere with that.
As for reverse... I'm not familiar with that particular ESC model. Maybe you need to switch from forward/brake mode to forward/brake/reverse like on some other ESCs, since reverse is not allowed in most racing rules.
As for reverse... I'm not familiar with that particular ESC model. Maybe you need to switch from forward/brake mode to forward/brake/reverse like on some other ESCs, since reverse is not allowed in most racing rules.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
