FlySky Noble NB4
#826
Tech Initiate
Thank you, great news! I’ve had this radio for about a week, simply incredible. Blown away by the fit and finish and how easy it is to set up and use.
#827
edit: sorry you figured it out before my response.
#828
Tech Apprentice
Don't forget, digital servos are powered all the time, moving or not. So, they will make noise, hum or chatter when not moving or even under very slight load. Analog only uses power when commanded to move. Of course if it seems excessive, its always worth checking your settings to make sure you have the right servo type selected. If an analog servo sounds like that, its usually bad, voltage too high, or type is wrong. But digital can be noisy like that.
#830
Tech Rookie
someone had the following error on NB4?
Resources error! Please update the transmiter firmware.
I can not do anything, it does not go from there.
I tried to update but it does not detect it.
Resources error! Please update the transmiter firmware.
I can not do anything, it does not go from there.
I tried to update but it does not detect it.
#832
Tech Rookie
I contacted Flysky with no luck, they ask me for a non-existent QR code on my transmitter and claim that without it they cannot help me, very disappointed with the brand
#833
Tech Apprentice
uhhh, the QR code is on the help page of the system menu, not sure how you would access that if the radio wont boot. Maybe best just to say it wont turn on.
#834
Tech Apprentice
#835
Tech Apprentice
there's mine. I have no idea how going to a sketchy URL will help them, but that's what the QR says.
#837
Tech Master
iTrader: (47)
Ok I got some insight. It appears that if your firmware was very old and you try to update straight to the newest version you get this error.
what version did you have originally?
try to install .79 or .83 or something. And see if it updates? If it does then try the .93 update again.
what version did you have originally?
try to install .79 or .83 or something. And see if it updates? If it does then try the .93 update again.
#840