R/C Tech Forums - Digital Servos from China

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Digital Servos from China (https://www.rctech.net/forum/radio-electronics/1003830-digital-servos-china.html)

Ran that Same Servo in 1:10 F1, works pretty well. I think you may like it. Performs well, and no "Noise" / Chatter. Radio used is Sanwa.

What's a good no name servo buggys 2wd+ 4wd

Quote:

Originally Posted by urban (Post 15333043)

What's a good no name servo buggys 2wd+ 4wd

Power HD Storm 6 or 7

TRA2075X is a decent servo for like 50 Bucks

Quote:

Originally Posted by dinohobby (Post 15335072)

TRA2075X is a decent servo for like 50 Bucks

Thats Traxxas, yet here are are looking for more of the off-brand names and reviewing and reporting back on them.

I'd not consider PowerHD a no-name brand. Not only do they offer great quality (Storm and B series), they are the servos of choice of various very fast touring car drivers, e.g. Marc Rheinard. Futaba's servos are also made in China by the way, and IIRC from all RC manufacturers only KoPropo continues to manufacture their servos in Japan.
I tried the PowerHD Storm4 (black) and the only thing I did not like was the Storm logo on its case. Great performance and pricing! When I tested a Powerstar low-profile servo, it would not properly return to its center position, and accordingly I'd not buy one of these or recommend them to anyone.

Well, that is because not to long ago Power HD was a unknown china brand, and the servos were readily available from Amazon and such at a good price. Now they are popular and mainstream and the prices went up, which the distribution has went down. The servos now cost ~ 25-50% more than they used to via alibaba, ATees etc.

Quote:

Originally Posted by mes (Post 15337443)

I'm interestes with the Storm-4 and B4. But what is the difference? From the specs, they look similar but the storm is more expensive

Quote:

Originally Posted by Skaar_rc (Post 15338355)

I'm interestes with the Storm-4 and B4. But what is the difference? From the specs, they look similar but the storm is more expensive

Storm 4 is up to 8.4V and has Ti and Steel Gears the B4 is good to 7.4 and has Ti and Aluminum Gears.

Power HD still going strong.

Quote:

Originally Posted by 1/8 IC Fan (Post 15403180)

Power HD still going strong.

Myb i will go for storm 3 as im not really looking for high speed. Will be going for it after I broke my $25 jx ecoboost servo

Quote:

Originally Posted by billdelong (Post 15331764)

JX servos are very decent for the price, however I would caution to only get the "Coreless" or "Brushless" versions of their servos, the generic servos tend to glitch and have poor signal response. I have also found that JX servo gears tend to last about a year before they start to get slop in the spline and eventually strip. It's very difficult to find replacement gear sets for JX making their products disposable. I have slowly made it a personal preference to only select a servo which has replacement gear sets available.

JX CLS-12V7346 - this brute steers my TRX-4 rock crawler - turns the front wheels with authority when I want them when I need them. Have no issues so far. They are however splashproof only as opposed to what they claim as being "waterproof" - easy fix with conformal coating if you really want the rig do some dipping in the water.

Motor: coreless motor
Operating Speed (11.1V): 0.12 sec/60°
Operating Speed (14V): 0.10sec/60°
Stall Torque (11.1V): 38 kg.cm
Stall Torque (14V): 47 kg.cm

https://cimg3.ibsrv.net/gimg/www.rct...a2c652605b.jpg

JX CLS-12V7346

where can you get replacement gear sets for it?

Quote:

Originally Posted by billdelong (Post 15403980)

where can you get replacement gear sets for it?

https://www.asiatees.com/display?Mis...d=155205&pid=1

looks like a really nice servo. i just hate the multi colored wires. all black please (yes, i've do the sharpie trick when i have to, but i'd prefer not to).