The Bear

iTrader: (13)

I'm there in spririt.

Jerry P

iTrader: (44)

Another great day of racing. Even with Sir Hacks alot aka Mike Hackulc getting me on the last lap of the Rubber tire A main..

xtrememadness

iTrader: (2)

hell yeah! what a blast today. 4 qualifiers and a main nobody does it like 360!! see everyone in 2 weeks

The Bear

iTrader: (13)

already looking for those results.

new layout or same?

Pics if it's new?

bigA

Another great Sunday at 360 alot of fun.

ToysRUsKid

iTrader: (16)

Can someone help me out with what pinions I would need to run at 360? I have a T2'008 with a set of spurs (100T-104T-108T-112T-116T) and 3 motors (10.5, 13.5, and 17.5). I'm not sure where to start in terms of pinions to run here.

Sal Amato

iTrader: (27)

Depends on what make the motor is what rollout you are going to run,you might need some spurs in the mid to high 90's
And pinions anywhere from mid 30's - mid 40's let us know what make the motor is and we can give you a smaller range of pinions

Ron Goetter

iTrader: (17)

Sal Do you have any current layout pics? Making the first of many 360 trips this weekend

ToysRUsKid

iTrader: (16)

Way too many options...

The motors are all Tekin Brushless motors. I'm confused why I would need spurs in the 90's, wouldn't a different combo of spurs/pinions put my FDR in a similar range? Am I missing something about the smaller spur? Please don't take offense to all the questions, I'm just trying to learn.

joey

iTrader: (88)

a smaller spur and pinion will be easier to get the FDR you want and will leave room in case you feel the need to gear up.. with a bigger spur you might not be able to get the rollout you want since the motors only move so much on the bulkhead

Sal Amato

iTrader: (27)

Hey Ron it will b good to see ya , there is a picture of the current layout a few pages back. The big classes right know are 17.5 rubber and 13.5 foam see ya this weekend

Sal Amato

iTrader: (27)

No offense taken ask all the questions you need we are here to help .if you are running foam you will be using the 13.5 and you will want to roll that out at 39.5 - 41.5 but it will only take a little time at the track to get you dialed in. As Joey stated with the 008 there is very little room for motor movement and that is why u would need the smaller gears

Ron Goetter

iTrader: (17)

What about 17.5 foam and 13.5 rubber any turn out for them?

ToysRUsKid

iTrader: (16)

So I should be working towards a roll out and not an FDR? I didn't understand what Joey meant by motor movement or why use smaller gears, now it's clear.

MikeXray

iTrader: (73)