Jamie Hanson

iTrader: (39)

Count me out for 12th tomorrow night. I ran out of time and didn't get time to finish the electronics.

Ray k

iTrader: (47)

Ed has given us the Ok to run 1/12 scale on thurs. night!!! Roll call!!

1. Ray K
2. Perry
3. Manny
4. Senior
5. Ed Z
6 Joe M
7. Dave B
8. Randy B
9. Matt J
10. Jake ?

Ray k

iTrader: (47)

Don't forget TCS race at the "C" two weeks ,24th !

Warmup/club race Saturday 23rd !

We should have a big club/warmup race on Saturday. A lot of people coming in from out of town .

Regular classes and TCS trim cars on Saturday and full TCS race on Sunday .

Two days of racing for the price of one . Also a great weekend to beat the Heat!!

See everyone the 23rd and 24th !!!

Jamie Hanson

iTrader: (39)

Makes me wish the F104X1 was out........

vafactor

iTrader: (6)

I'll be there tonite for some 1/12th scale action. ETA around 4pm.

jhhack

iTrader: (56)

what 1/12th is running, 13.5 blinky?

COLD AS ICE

iTrader: (19)

yes, 13.5 non boosted

scooterman1995

iTrader: (1)

hmmm all this 12th scale talk makes me want to come up!

COLD AS ICE

iTrader: (19)

Great racing tonight guys! I loved how close the racing was in 12th scale, it was awesome to see that many out there! See you all next week

vafactor

iTrader: (6)

so guys.........when do you want to gather again for another round of 1/12th scale action?

Ray k

iTrader: (47)

I'm still sore from the spank'in I got from the old guys . My car needs some recovery time from the concussion it got from repeated board meetings!!!

I was thinking the 23rd,next Saturday. But most people will probably opt. to run tamiya classes!! So I don't know if we will have enough racers for 1/12 scale???

jhhack

iTrader: (56)

For the tamiya race, first silver cans i've every tried to hook up and run.

Old speedos, one gtb spread spectrum and one speedpassion gt. Both say they will run brushed, anyone have experience with either and give me any help or advice as to how to set them to run siver can?

thanks

mojoman

iTrader: (11)

With a GTB you have to solder all three motor wires to the negative pole of the motor. On the battery lead you need to bridge the positive wire to split one for the battery terminal and one for the positive motor lead. Make sure you program the speed control to run in brushed mode.

HTH

vafactor

iTrader: (6)

Sorry about the dent in your side link. While it make look from the sidelines as if my car is under control most of the time, obviously, such is not the case. The dent in your side link is clear evidence of that. My appologies.

jhhack

iTrader: (56)

Ug, I suck at soldering. Maybe i'll look for a good / easier set up for an RS....