Will there ever be a 1/8th scale Electric onroad car
#1141
Tech Master
iTrader: (2)
The original concept looked like it uses 2S shorty packs that are popular in 1/10 offroad. One thing with their 3D model is that it shows that the middle battery pack terminals are blocked by the fore and aft batteries. I'm not sure if that was addressed in the production version or if shorty packs can't be used anymore and a special pack will be required.
http://www.redrc.net/2013/10/caprico...h-on-road-car/
http://www.redrc.net/2013/10/caprico...h-on-road-car/
The Capricorn E801 and my own version are based around the TTB electronic package, this contains motor, speedcontrol and battery.
The TTB battery pack is custom made for this car and is a single 6S pack with 4400mah capacity and 80C discharge.
The car in the video used an older type of battery which was only 3800mah.
Here is a picture of the E801 mounted with electronics:
#1143
Tech Apprentice
Very tasty indeed.
#1144
We will have our first 1/8 scale electric onroad race this year on our new indoor asphalt track in Jestetten/Germany at March 27-30th (track lenght 220m, wide 3.7m). I'think we will see some Capricorn E801!
If you will attend at this race, you can find more information on:
http://www.platzhirsch.net/rennen/
some track information:
http://www.platzhirsch.net/rc-indoorpiste/
and the registration for "free training" at March 27/28th:
http://doodle.com/ymdxpkagce2zhi33
race registration on www.myrcm.ch will follow asap.
If you will attend at this race, you can find more information on:
http://www.platzhirsch.net/rennen/
some track information:
http://www.platzhirsch.net/rc-indoorpiste/
and the registration for "free training" at March 27/28th:
http://doodle.com/ymdxpkagce2zhi33
race registration on www.myrcm.ch will follow asap.
#1145
I am very pleased at what level you raised 1/8 on road racing class!
You can create an album that will leave participants pictures of models, upgrades and tuning.
You can create an album that will leave participants pictures of models, upgrades and tuning.
#1146
the first 1/8 onroad electric race this year will be at March 27-30th (together with the European Championship Pro10!).
The race will hold on the new, large (220m lenght) indoor asphalt track in Jestetten (Germany)
below you can find the Registration for both categories
http://www.platzhirsch.net/rennen/
some track impressions (track is not finished yet!):
http://www.platzhirsch.net/rc-indoorpiste/
The race will hold on the new, large (220m lenght) indoor asphalt track in Jestetten (Germany)
below you can find the Registration for both categories
http://www.platzhirsch.net/rennen/
some track impressions (track is not finished yet!):
http://www.platzhirsch.net/rc-indoorpiste/
#1147
the first 1/8 onroad electric race this year will be at March 27-30th (together with the European Championship Pro10!).
The race will hold on the new, large (220m lenght) indoor asphalt track in Jestetten (Germany)
below you can find the Registration for both categories
http://www.platzhirsch.net/rennen/
some track impressions (track is not finished yet!):
http://www.platzhirsch.net/rc-indoorpiste/
The race will hold on the new, large (220m lenght) indoor asphalt track in Jestetten (Germany)
below you can find the Registration for both categories
http://www.platzhirsch.net/rennen/
some track impressions (track is not finished yet!):
http://www.platzhirsch.net/rc-indoorpiste/
Channel youtube? On line translation?
Group facebook for fan 1/8 electric on road - 1/8 Scale On-Road Electric
#1148
Hi Mikota,
below you can find some Videos ;-)
http://www.platzhirsch.net/videos/
after our race I'll upload some pictures...
26 driver "free training" at Thursday 27th
34 driver "free training" at Friday 28th
only 13 drivers are registered for the race...
Let's go guys!
below you can make your registration for the race 29/30th Mars:
http://www.platzhirsch.net/rennen/
and for "free training" (27/28th Mars)
http://doodle.com/ymdxpkagce2zhi33
below you can find some Videos ;-)
http://www.platzhirsch.net/videos/
after our race I'll upload some pictures...
26 driver "free training" at Thursday 27th
34 driver "free training" at Friday 28th
only 13 drivers are registered for the race...
Let's go guys!
below you can make your registration for the race 29/30th Mars:
http://www.platzhirsch.net/rennen/
and for "free training" (27/28th Mars)
http://doodle.com/ymdxpkagce2zhi33
#1151
Here is two videos of my pro10 and 1/8.
http://www.youtube.com/watch?v=QAoIayRrugI
http://www.youtube.com/watch?v=n8gvlrQi-2Q
#1153
Tech Regular
iTrader: (2)
Hello to all and greetings from Sydney, Australia, I have spent the last hour reading this thread and it is very interesting, besides a few posts from pattojnr a couple of years ago it seems this class is non existent in Australia, It definitely is not run any where in any Sydney club. Myself and a few others are trying to change this, we are not professional racers or even seasoned racers, as a matter of fact we have very little race experience between us, until now we have been racing our 1/ 10 modified EP touring cars against each other which have evolved into very fast little 235mm lola bodied and wide foam tyred hybrid pan cars, cars used include Edam Espirits, xrays t4 & t3 & tc6 associateds . One of our crew has an Edam 1/8 electric pan car running a castle creations mmm esc with 2200 kv motor running 6s lipo batteries identical to MikaR 's carbon pro pictured a few pages back, this car is very fast but is heavy and doesn't handle as well as the smaller 235mm cars, we have another racer with a motonica P81 running a 150a hobbywing ( fried 2 rx8 tekins running same setup as the hobbywing ) with either 2700kv 4s or 2050kv 6s, with 4 s lipo he struggles to last 5 min, while on 6s can make runtime.
another recently ordered another edam erazor to run the same set up as the aforementioned edam while I myself have also bitten the bullet an ordered an edam to run with castle mm2 and 2650 kv 4s ( hope this works but am a little nervous about runtime despite 6000mah 80- 90 c lipo's). hopefully within the next month we can start a class right here in Western Sydney.
Thanks for all the information already garnered by this thread , I will report back in the coming weeks to update how we have gone, hopefully all will be good, if anybody locally wants to join private message me for details.
In the meantime good luck to all racers trying to promote this class around the world and best of luck to the upcoming meet in Germany this weekend.
cheers
oldenuff
another recently ordered another edam erazor to run the same set up as the aforementioned edam while I myself have also bitten the bullet an ordered an edam to run with castle mm2 and 2650 kv 4s ( hope this works but am a little nervous about runtime despite 6000mah 80- 90 c lipo's). hopefully within the next month we can start a class right here in Western Sydney.
Thanks for all the information already garnered by this thread , I will report back in the coming weeks to update how we have gone, hopefully all will be good, if anybody locally wants to join private message me for details.
In the meantime good luck to all racers trying to promote this class around the world and best of luck to the upcoming meet in Germany this weekend.
cheers
oldenuff
Last edited by oldenuff; 03-25-2014 at 02:01 AM. Reason: bad grammar and spelling
#1154
Tech Adept
Oldenuff we have 4 cars up and running here on four cell and we are now working on a rx8 conversion and moving them all to 6 cell.
I will send a link to an image vid latter with one car running. We have all got 966's and need to find parts thus the idea to start the rx8 conversion. We may have 8 to ten running by next year.
Perth boys leading the way maybe
I will send a link to an image vid latter with one car running. We have all got 966's and need to find parts thus the idea to start the rx8 conversion. We may have 8 to ten running by next year.
Perth boys leading the way maybe
#1155
Tech Adept