Project: Break in Dutch machine
#211
Tech Apprentice
What????
You linked Harbor Freight, they do not carry the EBIS. Rctarget has their version.
https://www.liverc.com/news/new_prod...eak-In_System/
You linked Harbor Freight, they do not carry the EBIS. Rctarget has their version.
https://www.liverc.com/news/new_prod...eak-In_System/
Is this a different machine?
What happened to the original 'creator' and his EBIS?
#212
What????
You linked Harbor Freight, they do not carry the EBIS. Rctarget has their version.
https://www.liverc.com/news/new_prod...eak-In_System/
You linked Harbor Freight, they do not carry the EBIS. Rctarget has their version.
https://www.liverc.com/news/new_prod...eak-In_System/
#214
My DIY EBIS
used it this weekend not finished yet still have to add temperature gauge RPM gauge worked great the small fry idea work great
#215
#216
Nice! and easy to put away with the oil in it. But remember the deep fryer need to go as 100 degrees celcius. Many do start with a higher temp. But replacing the theromstat for a different one with a better temperature range is easy.
And I would use a different flexcoupler, a version with a clamp constructio instead of this one with a grubscrew, just not to damage the crankshaft.
And I would use a different flexcoupler, a version with a clamp constructio instead of this one with a grubscrew, just not to damage the crankshaft.
#217
DIY EBIS
Yes the temp stayed automatically at 200 degrees... not really going to replace the temperature control but more of a monitor so if I need to adjust the temperature. I ordered the wrong Flex coupler it was the wrong size first one I had was a clamp but it was a 6 not a 6.35 to a 5 mm.
#218
#219
Looking at that RCtarget....
The base unit:
The timer:
https://www.ebay.com/itm/12V-Thermos...-/401229762943
The RPM meter
https://nl.aliexpress.com/item/Digital-LED-Punch-Tachometer-RPM-Speed-Panel-Meter-4-digit-9999RPM-Tacho-Gauge-Hall-Proximity-Sensor/32671761984.html
I think on the inside a normal brushed motor is used with an el cheapo PWM controler
OK, nice looking case which is not that difficult to make fittin on the top cover of the mini deep fryer.
With outsourcing the bending and CNC milling of the materials I do not think the total costs will go above 350 dollar. I think they can share some fee with me for the idea
The base unit:
The timer:
https://www.ebay.com/itm/12V-Thermos...-/401229762943
The RPM meter
https://nl.aliexpress.com/item/Digital-LED-Punch-Tachometer-RPM-Speed-Panel-Meter-4-digit-9999RPM-Tacho-Gauge-Hall-Proximity-Sensor/32671761984.html
I think on the inside a normal brushed motor is used with an el cheapo PWM controler
OK, nice looking case which is not that difficult to make fittin on the top cover of the mini deep fryer.
With outsourcing the bending and CNC milling of the materials I do not think the total costs will go above 350 dollar. I think they can share some fee with me for the idea
#221
On Facebook you can find the EBIS product page (not to confuse with EBIS Australia). You can contact the builder RichardE on this forum.
And arround the world there are now several oil bath break in devices to find.
And arround the world there are now several oil bath break in devices to find.
#224
DIY EBIS
EBIS control box completed system ready to go fully functional. Video to come soon
WFR products ready to go!
WFR products ready to go!
#225
Tech Apprentice