R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Onroad Nitro Engine Zone (https://www.rctech.net/forum/onroad-nitro-engine-zone-71/)
-   -   Which engine? (https://www.rctech.net/forum/onroad-nitro-engine-zone/400351-engine.html)

LiL_JaSoN 05-19-2010 08:37 PM

Which engine?
 
Looking for a new engine for club races.. not looking to spend too much.. but want something reliable, and good low/mid end.

Choices so far that fits my budget..

Novarossi 353 +2 Edition 08' with 2630 Pipe
Picco JLR Red-Dot with 2651 Pipe
Picco P1-R Evo4 with 2651 Pipe
IDM P1-R Evo3 with 'not sure' pipe
Sirio S12 XXX VK Touring w/EFRA2653 Pipe

anything else?

gfilos 05-20-2010 12:52 AM

if you want low to mid power you cant go wrong with a picco version engine.
Also i have found the relibiality of these engine awesome.
If you re interested only for club races go for the normal p1r-evo4 and not the
edo edition.

Alex Siddique 05-20-2010 04:07 AM

buy an engine with good local support .
Nova 353 or plus 12
Rb
or Sirio

Mike 78 05-20-2010 04:26 AM

RVB
 
Buy an RB T10rc with a ballistik mod done, i have the T9rc with the ballidtik mod done and it gets great run time and plenty of power so i would hate to see how the T10rc goes. Just pm Ballistik Mods for a price he can supply the engine with the mods done and offer a whole heap of other engine services as well at a great price.

:nod::tire::nod::tire:

ALLSPEED 05-20-2010 04:55 AM

Don't over look O.S. the xz line are great engines. Much better than the tz's. Easiest engines to tune and they hold well

LiL_JaSoN 05-20-2010 06:10 AM


Originally Posted by Mike 78 (Post 7431009)
Buy an RB T10rc with a ballistik mod done, i have the T9rc with the ballidtik mod done and it gets great run time and plenty of power so i would hate to see how the T10rc goes. Just pm Ballistik Mods for a price he can supply the engine with the mods done and offer a whole heap of other engine services as well at a great price.

:nod::tire::nod::tire:

i wish, i believe it will be way out of my budget... the engine itself it out of my budget.. let alone with a pipe and mod.

maybe u can donate ure T9RC, then you will have a excuse to buy a T10RC. lol

gfilos 05-20-2010 08:32 AM


Originally Posted by Mike 78 (Post 7431009)
Buy an RB T10rc with a ballistik mod done, i have the T9rc with the ballidtik mod done and it gets great run time and plenty of power so i would hate to see how the T10rc goes. Just pm Ballistik Mods for a price he can supply the engine with the mods done and offer a whole heap of other engine services as well at a great price.

:nod::tire::nod::tire:

This is what you would recommend as a club engine?:D

Mike 78 05-20-2010 04:25 PM


Originally Posted by gfilos (Post 7431849)
This is what you would recommend as a club engine?:D

Yep may as well run the best gear all the time, my other engine is a T9rc with an ex factory RB engine which is just as crazy as my T9rc with the Ballistik mod. :D:D:D:D

Mike 78 05-20-2010 04:29 PM


Originally Posted by LiL_JaSoN (Post 7431299)
i wish, i believe it will be way out of my budget... the engine itself it out of my budget.. let alone with a pipe and mod.

maybe u can donate ure T9RC, then you will have a excuse to buy a T10RC. lol

what ever you get make sure you get in contact with Sean at Ballistik Mods and have him mod it you wont regret it. excellent power and run time. :):):)

Scott Fisher 05-20-2010 05:34 PM

Jason:

Do the IDM Evo 4 with the 2651. (if you can afford it) Or do the Picco Evo4 with the same pipe. I would not get an Evo 3 version of a Picco sedan engine. The rod is just not that reliable. The Evo 4 rod is much better.

LiL_JaSoN 05-21-2010 12:39 AM


Originally Posted by Scott Fisher (Post 7433607)
Jason:

Do the IDM Evo 4 with the 2651. (if you can afford it) Or do the Picco Evo4 with the same pipe. I would not get an Evo 3 version of a Picco sedan engine. The rod is just not that reliable. The Evo 4 rod is much better.

Yeah i was looking at the Evo.4... Seems like the cheapest aswell.

Picco Evo 4 - $200
Pipe - $85
Rod for replacing after break in - $25

Novarossi 353 08' with 2630. i can get for about the same price aswell

Serpent_Gordo 05-22-2010 10:11 AM

Picco is ok.. but it will lose power after you start running it and you over heat it about 1 or 2 times.... I would just go with a Novarossi, very strong and reliable, and this engine makes crazy power:D

Scott Fisher 05-22-2010 10:39 AM

My experience with Picco based engines are not the same as what Gordo has posted. My engines make good power and last. Any engine can overheat and that can cause damage. Right now the biggest problem with Novarossi engines is the glow plugs.

MikaR 05-23-2010 12:03 AM

Bro, you can't go wrong with this one or a similar

http://cgi.ebay.com/RB-CONCEPT-V12-R...item563c3f5e24

http://cgi.ebay.com/RB-CONCEPT-V12-R...item255a47458d

I'm out running those newer semi-priced lrp's and novarossi's easily... One of the best ever I'm sure. I have the 3 port EFRA legal but anyhow (this should be even for more power)

LiL_JaSoN 05-23-2010 02:15 AM


Originally Posted by Scott Fisher (Post 7440411)
My experience with Picco based engines are not the same as what Gordo has posted. My engines make good power and last. Any engine can overheat and that can cause damage. Right now the biggest problem with Novarossi engines is the glow plugs.

whats wrong with novarossi plugs? im running nova plugs in my rossi and have been on the same plug for ages!


All times are GMT -7. It is currently 06:09 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.