![]() |
Originally Posted by stefan
Picco or Mega 2607 with a short conucal header = awesome! :nod:
Just wondering because Uriah and several others recommend it with the JLR red dot, which is basically the same Picco based engine. AFM |
Originally Posted by afm
Have you had a chance to compare them with the Skyline VR 12 Plus ??
Just wondering because Uriah and several others recommend it with the JLR red dot, which is basically the same Picco based engine. AFM But if you follow Uriah's advice you won 't be dissapointed. |
Originally Posted by stefan
Skyline pipes are unfortunately not Efra approved so we can't run them over here.
But if you follow Uriah's advice you won 't be dissapointed. AFM |
Thanks guys, any idea where I can get the 2607 pipe in US website. Anyone tried the new Nova 2630 on spec 3?
Regards, MW |
LRP Spec 3 fuel
Can you guys tell me the perferred fuel for this engine, O'Donnell and Byrons are available in my area.
I would like to choose the best for the engine? :tire: thanks |
Originally Posted by jelayne
Can you guys tell me the perferred fuel for this engine, O'Donnell and Byrons are available in my area.
I would like to choose the best for the engine? :tire: thanks Byron fuel 16%,head shims 0.4 to 0.45mm max temp 110 to 115c,plug no 7 and sirio pipe.All this work better for me at the moment. |
Thanks I will try some 25% Byrons
|
Spec 3
I recently got a Spec 3 but I would like to use 25% Byrons, can you tell me if I would need to add the extra shims provided with the engine, or can I just add fuel and #8 plug and I should be good?
:confused: :confused: Thanks for any heads up |
Originally Posted by jelayne
I recently got a Spec 3 but I would like to use 25% Byrons, can you tell me if I would need to add the extra shims provided with the engine, or can I just add fuel and #8 plug and I should be good?
:confused: :confused: Thanks for any heads up |
Originally Posted by afiq
U can go for 0.45 to 0.5 mm head shims for 25 % fuel,plug no 7 or no 8 will do but have to monitor on your low end needle setup not to lean. :nod: what car are u running?
|
Hi Afiq, I just got my Spec III from HPC, any idea how would Mega Pipe #2602 run on Spec III? Would you recommend Sirio over others for Spec III, still never break in yet, awaiting for your recommendation. Thanks man.
Regards, PMW |
Originally Posted by infinique
Hi Afiq, I just got my Spec III from HPC, any idea how would Mega Pipe #2602 run on Spec III? Would you recommend Sirio over others for Spec III, still never break in yet, awaiting for your recommendation. Thanks man.
Regards, PMW |
Thanks bro, will swing by asap, give u a call before coming. Thanks again.
Regards, PMW |
Can anyone confirm for me that the LRP plugs are in fact picco plugs? thanks!
|
Originally Posted by German Muscle
the Z12R is a good motor as it is picco.
The rest of the LRP linup is SH which are junky motors |
| All times are GMT -7. It is currently 04:20 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.