I'm finally gonna get some serious power the problem is it
is available to everybody. J/k i'm glad that all these engines
are getting faster out of the box thanks to guys like Dennis
that is one of the few guys that supplied h/power equal to
what the factory guys had. Since you are comparing the
power output to your rtu i'm sure no one will be disapointed.

are these engines going to be available through rdlogics to the general public?

and are they going to be ready before the US nitro season starts back up?

The answer to your first question is yes
The answer to the second is that is the plan.

Dennis, do have time or planning to go to the pre-worlds in Brazil?
We will have our national hero in there, should be a perfect start for both of us.. please inform us, thank you for your support.

thats great news

thanks motorman

i'm sure a lot of people are looking forward to triing this engine and im sure
it won't disapoint. seeing how busy motormans previous thread was and
how many posts and responses was on that thread i knew it was only a
matter of time before he produced his own line of engines. :tire: :tire: 

you see brads car run last week at rev? That is the target!

just wondering since you guys stopped running mugen what cars are you racing now?

i think im going to get a g4 for the upcoming season any comments?

Serpent
 

Tennessee and I are running Serpent 710's and I am also running the 950R. Very pleased with the 710 so far.

I'm still running Brads Favorite brand. LOL .:weird:
I plan to run a Mugen this season, Unless I see that the serpents have a distinct advantage over me.

UHHHHHHHHHGG!!!
 

We are going to have to change that! I've allready converted about 10 guys and will keep the cause going. How much money do you need out of that pile and I will find you a buyer.

Re: UHHHHHHHHHGG!!!
 

I think Brad's on a crusade! :lol: Can't blame him, though! Good luck ya'll. Comin' down for the Airtronics, Brad?

Re: Re: UHHHHHHHHHGG!!!
 

Yep. I am. Haven't seen you in awhile. Later. :tire: :tire: :tire: :tire: :tire: :tire:

Re: Re: Re: UHHHHHHHHHGG!!!
 

Yeah been busy with the house etc., then jacked up my back around the new year. I'll see you and maybe Tennesee at Rev next month. It'll be interesting to see your new ride (and maybe new motor)! Congrats Dennis!

Thanks Kev

Hey T when you come back for the nats I'll bring a tow rope so I can drag yer azzz around the track with that M car since the reciever and half of the radio tray off that S car will be laying somwhere on the track
LOL
Gotcha bro, ZingAAAAAAAAAAAAAA :flaming:

What?
 

Hey Dennis, what is snow?

Hi dennis is the replacement parts like c. rods going to be available right away and what color will the heat sink be for
the production line.

I saw brads car at the last club race at rev. i would have
to say he had motor on everybody. So if that is the target on the
performance i'm sure every one will be satisfied with the power output
of this motor. On another note ill be testing out the new pipe you helped
out on and i am hoping i can get that matched up with the new engine.:nod:

Considering the way Brad's car looked at Revelation this past weekend I'd say that no one will be disappointed at the RD/Richey motors. I have to admit that it was a sight to see on the straightaway!:D As for the PlayStation 12,:confused:

Get in the queue, jwf_frani. ;) :lol:

New pipe
 

I will be running the new pipe this weekend in Vegas for the first time as well. Hey Dennis what is snow??

Re: New pipe
 

SNOW ! :weird: . . . no idea what that is.

It was a pleasant 41ºC (105ºF) down under last Saturday.
OK then, it wasn't pleasant. ;)

brad what race is going on at vegas?

It took two days for me to get it! then I fell out of the chair. LOL

Damn whitty!:)

Brad that would be the opposite of what comes from the sky in HE double hocky stix. Can you say damn its hot.
IE. Phoenix AZ.

JWF
yes parts will be available right away, colors, and logos TBD

:lol: Now now play nice!

4 Aces club race. I just want to get a little track time before the Speedline and do some high altitude engine tests. (Pipe etc...)

Oh yea and I almost forgot I have some overdue library books that I need to personally return to my favorite librarians. (I love Vegas).

Re: Re: New pipe
 

That sounds pleasant to me. It was finally about 80°F here today so I finally got to ride my motocycle today for the first time in about two months. Damn I want to go to Australia.


P.S. I still don't know what snow is.

What do you ride Brad? :tire: :tire:

Suzuki TL1000R '01 with 7000mi on it I really need to ride it more, but try not to push my luck with my drivers license. I like to do wheelies too much.

:lol: Same boat- '98 VTR1000. :D

Brad, there is no Speedline race this year. Things got screwed. There's a thread one it in the Racing Forum. Check it out, pretty nasty

Oops, sorry just saw the other Speedline thread. I gues the race is on:nod:

Re: Re: Re: New pipe
 

Tell me when your coming and I'll get this end arranged. :nod:
If you like a good ride in twisty country, This is a good one.

I've taken a half decent car up this range many times. ;) - here's another pic.

Re: Re: New pipe
 

Hell, I'd be happy if I could get 41* F !!!!

Re: Re: Re: Re: New pipe
 

That looks like it would be in my 350Z. One of these years I am going to make it to Australia.

if these motors are anything close to what you have done for bbntc3 thay will be sick fast. we run on a 110 foot track and bbntc3's driver had to dial out 1/4 throddle to keep the car in check. i can't wate for them to get in production and out for sale all of my motors are going to these

thanks for your hard work

wvracer

If he had to dial out throttle, then it's the wrong engine for him.

stefan i think he was just making the point that the engines
have alot of power.