your not running this motor rudi??

Hey if you are so interesting in this engine, why wouldn't you order one-they aren't that expensive and service provided is much better too.

i already bought a new NSR. he told me they are a prototype motor. the entire engine is a mat grey.

Tomas, this is production engine no mod require and should run as quick as any JP or MAX engine,

Kitracer had used one in FEMCA championship, we only have the 3port engine with no shortage of power and speed compare to those moded 5port.

I will complete my engine break-in this weekend and ready for some serious race in the final and my G4 is doing low 19s with the STS, so watch out and move away

That engine is from first batch and all engines are the same-like you sad mat gray. They are sand blasted. I try to resist to annodize head in any color ( this is from tech point) but seems like I am loosing my position and will anodize next batch. But cranckcase will be the same mat gray.

i'll wait for you to do a few hot laps then i'll zoom past you with a 16'er! that's my aim
j/k mr tl is very quick.

KAKAKKAKAKAKKAAK

Click,

Sent you a reply. Sorry you have been waiting.

TG

A lot of the designs/technologies you are using on your PS12 engine are not new. Eg sleeveless cylinder, ball bearing without the inner ring (with balls running on crankshaft) etc. They are desings from airplane engines. These designs can be seen on some of the european/russian airplane websites. They are just been used on car engines.

Right, he was saying that all along. Please read past posts.

You are absolutly right, a lot of designs on our PS12 came from airmodeling and boating and if you read all my posts I am always say it. I will repeat one more time- I am orriginaly from Soviet Union. Since 1976 till 1993 ( I left USSR) I was making tether boats 15 engines with air propeller and 60 engine with half submerge water proppeller. On the beginning of my hobby carrier I was flying control line speed models, but in 1979 concentrated only on boats. From 1993 till march last year I was doing nothing in hobby and never think will come bak. But my son push me back and all my work didicated only to him. Whatever I do in hobby it is my hobby and actualy I don't make any money on it. So I have been in RC cars just about one year, that is all. But I work with engines since 1977 ( 27 years ago).
Now about the design-yes here is some engines with sleevles design, but not only in air modeling , also on lawn movers too. Yes a lot of russian engines don't hve inner ring on main bearing and I use the same here ( why would I do different if this design is the best?)-so what is wrong with that? Sirio innovated cooling fins on sleeve and brought it as new design-yes it is for RC cars, but in general first this design was using on Russian engines in earlier 80's.
I came from Russia and belive me, if I got involve in hobby, I will bring here what ever is newest and the best developed regrdless is it in airmodeling or boating or RC cars. One more thing, I got pretty good results from the stuff I have already brought.
So what is the point on your post?
BTW sleeveles design in airmodeling is made only on one brand ( in mass production) and it is 40 size engine, and belive me to make the same design on 12 size is quete different and if you familiar with tehnolgy you will know that cast AL alloy with wall that our thikness with no micro air pockets ( affecting chrome plaing) isn't that easy and similar as on 40 size engine.
Wow, I am done

Yeah, what he said!

Thanks Edward for all the work you have put into our engines. I hope Leo stays in this hobby so you can also. Now, LET'S GO RACING!

Yep. Got them

Ed will never quit now. He is hooked on the rush.

Duh....

Hi Edward! Hope everything's going well!