R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Onroad Nitro Engine Zone (https://www.rctech.net/forum/onroad-nitro-engine-zone-71/)
-   -   Novarossi engines thread (https://www.rctech.net/forum/onroad-nitro-engine-zone/29453-novarossi-engines-thread.html)

Roniel_R 01-08-2014 07:51 PM


Originally Posted by Arboleda (Post 12881841)
I'm interested in hearing your impressions.

With the 41019 header,

Nova 9886-very good low end and mid range power,good high end

Nova 2015-good all around power very smooth

Nova 2052- good low and mid range power,very good high end power

TerribleTy 01-09-2014 02:28 AM


Originally Posted by Arboleda (Post 12881841)
I'm interested in hearing your impressions.

Pretty much run the 41019 header and the Super Strong 9886 exclusively in Utah. It is the best combo we have found and it tunes in very nicely.

Thanks for the reply guys you sealed the deal for me! :tire: :tire:

GPXJOE 01-20-2014 10:05 PM

guys my nova flash pt has bubbles on top of the piston and in the combustion chamber on top of the piston. and the engine sound has a rattling noise that sounds as if there is something wrong with the engine. but the engine does not flameout and is running ok. what should i do?

change the bearings?how?

GREGORY! 01-20-2014 10:10 PM

From some info that i have the new motors for 2014 will be VIRTUS 12 and VIRTUS buggy.for photos etc we must wait for the toy show..

TerribleTy 01-20-2014 10:41 PM


Originally Posted by GREGORY! (Post 12926688)
From some info that i have the new motors for 2014 will be VIRTUS 12 and VIRTUS buggy.for photos etc we must wait for the toy show..

Toy fair starts the 29th I think, a week away. I'm curious to see what comes out.

TerribleTy 01-20-2014 10:45 PM


Originally Posted by GPXJOE (Post 12926676)
guys my nova flash pt has bubbles on top of the piston and in the combustion chamber on top of the piston. and the engine sound has a rattling noise that sounds as if there is something wrong with the engine. but the engine does not flameout and is running ok. what should i do?

change the bearings?how?

I'd tear the engine down and see if I could pin point the root cause of the rattling. If a bearing is going and it isn't changed you risk damaging the rest of the motor. I'm no Nitro motor expert by no means hopefully someone with a bit more motor knowledge can help you out. Still Id tear it down myself and see if I could explain why I hear noises and so on. The motors aren't bad to take apart and put back together, just be as clean as possible.

Roniel_R 01-21-2014 04:56 AM

[QUOTE=GPXJOE;12926676]guys my nova flash pt has bubbles on top of the piston and in the combustion chamber on top of the piston. and the engine sound has a rattling noise that sounds as if there is something wrong with the engine. but the engine does not flameout and is running ok. what should i do?

change the bearings?how?[/QUOTE

Try to post some pics to pin point the problem .

GREGORY! 01-21-2014 05:25 AM

.

kyosho malaysia 01-21-2014 08:05 AM


Originally Posted by GPXJOE (Post 12926676)
guys my nova flash pt has bubbles on top of the piston and in the combustion chamber on top of the piston. and the engine sound has a rattling noise that sounds as if there is something wrong with the engine. but the engine does not flameout and is running ok. what should i do?

change the bearings?how?

what is the engine size,no of plug and running temp

Mikiehotrod 01-22-2014 05:57 PM


Originally Posted by Mikiehotrod (Post 12880726)
what is the difference between the
2660 and the 2630? thanks,mike.

so no one has tested the 2 pipes side by side. heard one of them is a 2 chamber and one is 3 chamber???

greg.dawn 01-23-2014 12:15 AM

we were told 2660 was just an upgrade from 2630 we use 2660 with 5 fin con /header it is really good at Sydney and brendale whitch are both quick tracks

Grinder 01-23-2014 03:45 AM


Originally Posted by Mikiehotrod (Post 12933060)
so no one has tested the 2 pipes side by side. heard one of them is a 2 chamber and one is 3 chamber???

The 2630 makes slightly more power than the 2660. The 2660 is slightly better on mileage. The 2660 is more durable. The 2630 is very thin.

I prefer the 2660. It's a good combination of power, runtime, and it's more durable.

Mikiehotrod 01-25-2014 02:46 PM

thank you greg and Uriah for the reply.

Icero 01-25-2014 02:49 PM

Is the 21-P5 a good choice for a losi 2.0 on an indoor track?

greg.dawn 01-25-2014 07:25 PM

I get a lot of info from these sights when you get into as mutch trouble as I do it helps lots and thanks to every body that ansers


All times are GMT -7. It is currently 02:09 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.