|
Originally Posted by stefan
(Post 3601391)
MAX 2602, you are going to be very surprised.
I know I was after I switched from the 2630....:sneaky: |
Originally Posted by stefan
(Post 3601391)
MAX 2602, you are going to be very surprised.
I know I was after I switched from the 2630....:sneaky: |
Originally Posted by Corse-R
(Post 3600563)
The engine that applies are a pair of JP Racing B5-T and a Nova Plus 21-7. The break-in is finished (or almost like the 21-7) and need to change the conrod of all two. My question is regarding the conrod type.... Plain R7 or R6 with hardcoated wrist pin?
The JP came with the R5 and the 21-7 came with the R7, but checked dimensions and the R5, R6 and R7 are the same. Only changes small details: R5 is the heavyest, R6 is lighter but comes without the upper bronze bushing (and I think that needs a hardcoated wrist pin - only available thru JP Racing) and the R7... seems to be almost light like the R6 but with upper bronze bushing. Those are Off-Road engines, they buzz on my truggy... Salvatori, Uriah, ... ? Personally, I'd steer clear of the non-bushed rod. |
Originally Posted by Killa G
(Post 3601546)
How so? More torque, tope end or both? Do you think the 2602 would also be a good fit for the plus 12?
|
Originally Posted by CIMRI
(Post 3601487)
danke für die prompte antwort. Hat diese auspuffanlage auch sein eigeness manifold? Ist es ok
|
Originally Posted by stefan
(Post 3601918)
Yep, it got a unique looking conical manifold.:nod:
thnx |
Pipe
Originally Posted by CIMRI
(Post 3601967)
thats good. actually Im not happy with the performance of the 353. Hope the pipe will be help.
thnx |
Originally Posted by Johny
(Post 3615379)
You should consider trying the novarossi pipe. You will be surprised.
He said he is currently running it with the Nova 2630 pipe and manifold. |
Originally Posted by Corse-R
(Post 3600563)
The engine that applies are a pair of JP Racing B5-T and a Nova Plus 21-7. The break-in is finished (or almost like the 21-7) and need to change the conrod of all two. My question is regarding the conrod type.... Plain R7 or R6 with hardcoated wrist pin?
The JP came with the R5 and the 21-7 came with the R7, but checked dimensions and the R5, R6 and R7 are the same. Only changes small details: R5 is the heavyest, R6 is lighter but comes without the upper bronze bushing (and I think that needs a hardcoated wrist pin - only available thru JP Racing) and the R7... seems to be almost light like the R6 but with upper bronze bushing. Those are Off-Road engines, they buzz on my truggy... Salvatori, Uriah, ... ? go with the R5 for the JP one........... you would not achieve better performance with a lighter one, so stick with the most reliable one since you will not gain anything noticable specially racing offroad...... I haven't seem the JP version in person, but I'd only stick with the R7 in the PLUS 21-7 since it's supposed to be reliable even with the light conrod....... |
Guys, need some input here from anyone that has ran both, or ran with either a Nova +12Ct/2630 or a Max Power SL3 combo. I run on smallish track and an engine with a decent bottom to midrange would be nice. Just needing some opinion as I can't find much on the SL3. I do see that the +12 is a longe stroke whereas the SL3 is closer to a square stroke, so I would think the +12 may have a little better bottom end.
FWIW I've been running a Ninja in my NT1 and it can be ballistic, but I've had one too many days of chasing a tune. thanks |
Originally Posted by stefan
(Post 3601391)
MAX 2602, you are going to be very surprised.
I know I was after I switched from the 2630....:sneaky: Does anyone know where to get these in the US? The only places I can find that sell these are overseas. |
Originally Posted by JetMD
(Post 3641734)
Is this the Mega pipe you are talking about? http://www.serpent.com/product/223015/
Does anyone know where to get these in the US? The only places I can find that sell these are overseas. http://www.rcmaxpower.com/public/Marmitte_Ico/82.jpg I don't know who imports max engines to the US. |
Originally Posted by stefan
(Post 3643578)
Yes, it's the same than the Max Power 2602 (the Max comes also with the same conical header):
http://www.rcmaxpower.com/public/Marmitte_Ico/82.jpg I don't know who imports max engines to the US. www.rcamerica.com |
|
hey guys, i have a plus 12-3sct coming soon, any pipe recomendations and run in procedure ? and how is the longetivity or life span of the engine going, reliability ? thanks guys. :)
|
| All times are GMT -7. It is currently 01:15 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.