Grinder

iTrader: (2)

Sorry, I do not have that part.

Grinder

iTrader: (2)

Congratulations to Jeff Zuccarell for winning the Midwest Series Race in Cincinnati Ohio. Jeff was ballistic with his Murnan Modified Picco Torque .21 in his RX8 XRAY chassis. I had a great time swapping back, and forth with you during the main. Until I demolished my car at the entrance to the straight. Looking good Jeff!

ToysRUsKid

iTrader: (16)

Congrats to Jeff and thank a lot for helping me get that motor tuned. It ran great in the main until i stripped second gear. Still managed 4th place somehow.

Factory Seal

iTrader: (29)

I didnt feel like reading all the way back to find out so,.....do you sell motors or mod motors?

thanks Donnie......

ToysRUsKid

iTrader: (16)

both, check out his website.

tonyhalandri

Anybody knows which is the factory position for the mixture control valve in a .21 flash special murnan?

Thanks

rx7ttlm

iTrader: (30)

How does the flash pts out of the box compare to your pts modified? as far as power band and run time.

Thanks

Grinder

iTrader: (2)

My modified PTS retains the good bottom end, with much better top end than the stock PTS. The mod version starts making more power than the stock one immediately, but really shines up top. Same runtime as stock.

ToysRUsKid

iTrader: (16)

Uriah, Which rod on your sit fits the Flash .12PTS?

Grinder

iTrader: (2)

Novarossi 07604.

Dasmopar

Jeff Z aka Vector03cobra won the top speed award (66.6mph) at the GLC this past weekend with his Murnan Picco and I tied for 2nd in the top speed award with a Murnan Flash. (65.6mph)

Grinder

iTrader: (2)

Congratulations. All of the Murnan Modified Engines there performed flawlessly, easily made runtime, and were TOP FUEL!! Run one, or chase one.

TomB

iTrader: (10)

Hi Murnan, what pipe would you recommend for the Murnan Modified RBM3 Modified Full Ceramic 2011.

Also, do the RB's have headers of various lengths like the novas? or are they a fixed length?

thanks

Grinder

iTrader: (2)

The RB 2668 works great. The novarossi 2660 pipe with long header also works great. The header is novarossi 41617.

TomB

iTrader: (10)

thanks murnan, that's good news as i have nova pipes coming out of everywhere

I have another question regarding the power characteristics of the following three engines. What srot of power bands have they got, ie bottom end mid range and top end characteristics? is there any of the following engines which has noticably more top end or mid or bottom end than the other?
the three engines i'd like to know more about are the:

-Murnan Modified Novarossi Flash .12 PT Full Ceramic
-Murnan Modified RB TOURING 11 RS
-Murnan Modified RBM3 Modified Full Ceramic 2011