2LikesATOM engines thread
02-10-2015 | 06:26 PM
#53
Tech Addict
Joined: Oct 2005
Posts: 617
From: Australia
http://www.actionmodelisme.com/produ...id_product=547 seems like its available BUT the photos are not updated.. so is this the engine sold on this web page now..? will i get this engine you have shown here if i was to order both engine and exhaust system.
02-11-2015 | 12:34 AM
#56
The 2015 version of the VORTEX with some updates will be available in middle of january.
1 - the burn room has been modified to advance the ignition timing.
2 - the conrod has been changed completely with a different stroke length and a single copper bushing insert.
3 - the sleeve has been modified to change the intake and exhaust timing
to increase the high speed limit. The stroke of piston has been changed to
increase life expectancy and to increase the oil retention ability on the surface
of the sleeve and the micro-grooves are increased for an additional oil content.
4 - to maintain a higher degree of stability of the carburetor, the High Speed
Needle has been modified.
5 - the cooling head color has been slightly modified.
1 - the burn room has been modified to advance the ignition timing.
2 - the conrod has been changed completely with a different stroke length and a single copper bushing insert.
3 - the sleeve has been modified to change the intake and exhaust timing
to increase the high speed limit. The stroke of piston has been changed to
increase life expectancy and to increase the oil retention ability on the surface
of the sleeve and the micro-grooves are increased for an additional oil content.
4 - to maintain a higher degree of stability of the carburetor, the High Speed
Needle has been modified.
5 - the cooling head color has been slightly modified.
+1 on the internal pics.
