Any suggestions for motor pipe combos?
08-16-2012, 02:03 PM
#31
the TTR pipes are not overly strong performers...get a real 086 or 9886 and I think you would be blown away...I have a TTR 2035 and it is one of the worst performing pipes I have encountered....
08-16-2012, 02:08 PM
#32
08-16-2012, 02:30 PM
#33
08-16-2012, 04:38 PM
#34
good pipe for the os .28 is jp-2 or jp-3, i was getting 12 minutes run time
good pipe for the alpha would be a 2072
good pipe for the rb c6 would be 2072, jp-2 or 3
these are what i have had good luck with. might not be the best.....only what worked for me so please no flamers or arguements.....lol
good pipe for the alpha would be a 2072
good pipe for the rb c6 would be 2072, jp-2 or 3
these are what i have had good luck with. might not be the best.....only what worked for me so please no flamers or arguements.....lol
08-16-2012, 06:07 PM
#35
Lol I have said thru txt I have Buku Pipe on the way, lol, and you're sending that JP3 Mr.Daniels
I don't know why it's still being pressed.
Appreciate it though
I think the buku pipe will be just fine
I don't know why it's still being pressed.
Appreciate it though
I think the buku pipe will be just fine
Last edited by IROC-AR15; 08-16-2012 at 07:51 PM. Reason: Spelling error
08-16-2012, 06:21 PM
#36
im sure it will, never ran any buku stuff but sure it will suit your needs just fine. that jp pipe im sending you......i did say it has senn better days...lol
08-16-2012, 06:43 PM
#37
Yep
You warned me!
Kinda why I bout the pipe too. Got a sweet deal
Buku pipe and clutch for $75 shipped and they were used only one race day. Seller went different route.
After I get done testing and reporting back I think I'm disappear from the board awhile again.
You warned me!
Kinda why I bout the pipe too. Got a sweet deal
Buku pipe and clutch for $75 shipped and they were used only one race day. Seller went different route.
After I get done testing and reporting back I think I'm disappear from the board awhile again.
08-16-2012, 06:49 PM
#38
im about done here for a while myself, atleast buying, not to may honest people out there!!!!
08-16-2012, 06:52 PM
#39
Already left some for you. 
Ahead of schedule
Be looking out for the mail say Tues. WED.
If not received by then lmk
I double checked the address this time though and had someone write on the envelope with better handwriting. (lefty)
Ahead of schedule
Be looking out for the mail say Tues. WED.
If not received by then lmk
I double checked the address this time though and had someone write on the envelope with better handwriting. (lefty)
Last edited by IROC-AR15; 08-16-2012 at 07:26 PM. Reason: iPhone autocorrect error
08-16-2012, 06:57 PM
#40
08-16-2012, 10:27 PM
#42
I'm anxious though to get this Buku setup and see how it adjusts out.
It would be nice to kind of tune to track using pipe if that's possible lol
08-16-2012, 10:43 PM
#43
Another good bigblock pipe for the OP is the 2047.
08-16-2012, 11:14 PM
#44
I only posted that cuz I'd never heard that before either(that the 2039 is similar to the 086). Not saying it's true either, but funny that there it is on Amain.. The pipe I had was an Ofna 086, and I personally hated it on every engine I ever tried it on. I liked the JP-2 MUCH better.. And there are quite a few people about running the 2035, so I doubt it sucks all that bad.
Another good bigblock pipe for the OP is the 2047.
Another good bigblock pipe for the OP is the 2047.
You guys may never heard the 2039 is similar but the description matches that of the 086. I know my pipe isn't like a 2035. That's listed on my box also with 2039 highlighted and a sticker signifying the two are diff pipes.
I have a JP3 on the way and also a Buku adjustable pipe on the way.
Will give my thoughts on Buku once arrived and I will test it on all three engines. I believe the Buku will be a good all-arounder
So I hope lol
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
