Blackmagic21 would you be interested in buying a black magic .21 and the pipe? and if you were what would you offer for it? I think the bearings need replaced and there is still alot of pinch in the motor but not the mechanical pinch. You can roll it over with your finger when the glow plug, pipe, and carb is on it with some force. Meaning it doesn't get stuck at the top. But any who, what do you honestly think it is worth.

send me a few good pics of both
if the pipe is in good shape about up to 60.00+
if the head is still in good shape "not dinged bad" i pay up to 150+

i would say about 200+ for the combo "new p/s and rod 150.00 ceramic bearings 65.00" and you have one of the best engines ever made!!

with good tune and the 5.5 - 6.5 restrictor and the magic-one pipe you can
out run and last as long as any new engine mill you race against


email= [email protected]

Wayne

let me clean them up to my specs and i will certainly post some pics

hey sent u a pm ill be checkin for ya thanks

i sent factory an email on that itll b monday at least b4 i know for sure

Just stopped in to say Hi and see how all you guys are doing. Casey had a GREAT run this weekend with his Mamba in truggy and the Cold Fusion Fuel ran Great all weekend.

Dirt devil I can not get the o rings for that pipe any longer is what iam told sorry if there is any way I can help with something else I will try thanks

you should be able to find some o-rings at a hardware store or Granger inc has stores just about everyware take the pipe or old o-ring with you
and you should be able to find some

Where is this Casey and how come he is not posting on here?????

Casey is kyosho17 he is my race buddy we both ran for Axe Rossi and now he is the Axe Rossi guy and i run for Alpha & Rc Pro but we are steal friends .

LOL I FEEL LIKE A BIG DUMB A** I DID NOT KNOW CASEY WAS KYOSHO17
WELL F%@#
SO WERE DO YOU GUYS RUN MOST OF THE TIME AREA/TRACKS

We race at Wolf Pack Rc Track in Arkansas Most of the time but we will all so be at the AMS race and some of the Rc Pro races.

Take a look at his Company name KC Engines.com it got him name in it KC .

Now iam mystery man lol that's funny

Bummer, because i think the original o-rings were of the high temp kind. But thank you much for trying

Well you could try something as blackmagic said its worth tha try very good pipe its too bad they quit making a good thing if you want you send it to me and I will try to make something fit if you don't want to do it