|
Dang
I saw theJP puller on e bay, it looked pretty cool, but no need to get so aggressive. I don't understand where all this animosity is coming from, but Ive noticed it before, whatever the reason, leave me out of it.....:lol:
|
Originally Posted by TommyBlazin
(Post 9274052)
YEA im surprised to hear these amateur ways of removing sleeve from so-called professionals, that jp tool is second to none, i have NEVER tried anything else, as the ways mentioned can only do damage, the jp tool, you just pop it in, and pull it out, it has rubber that expands in a sense and grabs on, so when you remove your not PUSHING with a toothbrush on the bottom of a sleeve, wich happens to be the weak part, and im sure the stubborn ones, it HAS to make them slightly out of round. pm me i can direct you where to buy for under 20$...
Btw , no zip ties here ;) |
nah man, no animosity, just want to make sure the right advise is given out, for 20$ there's no worries, i have done the zip tie method, WAY BACK when i didn't know any better, its a forum, just passing the best info i can is all man....jp pullers are great, btw how much on ebay? was it the .12 or the .21 puller, id like a new one....thanks
|
Is it correct to assume the front bearing on a N21R is 7x19x6?
What's the size of the rear bearing? |
71012 Ceramic Front bearing
Anyone have any input on the 71012 novarossi ceramic front bearing.
I do know they aren't cheep 100.00 I did not find much info on the net. Anyone know were to get one? |
Originally Posted by Redvet79
(Post 9309796)
Anyone have any input on the 71012 novarossi ceramic front bearing.
I do know they aren't cheep 100.00 I did not find much info on the net. Anyone know were to get one? |
Originally Posted by Locum51
(Post 9308186)
Is it correct to assume the front bearing on a N21R is 7x19x6?
What's the size of the rear bearing? |
71012 Ceramic Front bearing
Are the nova 71012 bearings that much better than say tko?
I have a bonito that i would like to put a ceramic in the front. |
Anyone know where i can get the new style exhaust gasket..the ones on the BTT??
|
Originally Posted by GMS_Racing
(Post 9313084)
Anyone know where i can get the new style exhaust gasket..the ones on the BTT??
the old style still work just fine on the new valley style instead of old groove/channel style fyi ;) |
Originally Posted by Redvet79
(Post 9312413)
Are the nova 71012 bearings that much better than say tko?
I have a bonito that i would like to put a ceramic in the front. tko are good but the novarossi stuff is very good , its two different price points , two different quality levels :) |
Originally Posted by GMS_Racing
(Post 9313084)
Anyone know where i can get the new style exhaust gasket..the ones on the BTT??
http://www.murnanmodified.com/produc...roducts_id=738 These are the most durable exhaust gaskets that I have ever seen. They are expensive, but certainly worth it. |
Originally Posted by houston
(Post 9274110)
You truly are one of a kind buddy
Btw , no zip ties here ;) http://www.amainhobbies.com/product_...e-Removal-Tool hey it got me to throw away my zip-ties, well not use anymore...the jp is cleaner, but i just ordered this, its sweet, goes to a larger size than .21 so it's more versatile.. |
thanks i have one , dont use it
|
I know the .21 novarossi engines are mostly shimed at .80 and I've read after breakin you can take out a .10. With the .28 Plus 28-7T engine it is shimmed at .60, as once once the breakin is completed is it best to leave it shimmed at .60 or are people also taking out a .10? I'm running it in Late Model oval racing.
|
| All times are GMT -7. It is currently 07:01 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.