Oil it up good and work it out , should free up , push it all different ways as you work in and out

Monty. Did you just use a drill bit to open up the Hudy "cup" so it hits the outer race prior to the inner race when pushing the bearing in?

Big countersink bit

I'm looking for a Novarossi 41021 header set NIP. Pm me if you know where I can find one for a good deal.

I got em , amain has em , absolute has em

Guys I need a quick question answered probably been asked a million times . I have 21-4 btt and would like to find out what's the best pipe combo ? I need good low end for the triple right after the tight corner ,not to much run up . thanks

41021 with 9901 or even the werks 2058. With the 9901 you could end up with to much wheel spin and breaking traction if your not easy on the throttle. I run the 41021/2096 everywhere on my Btt because it reduces wheel spin and the buggy just squats and goes. little softer on the bottom then the 9901 or the 2058 and more top end.

Hey thanks , I started with and dynamite 086 had good low end but fuel mileage wasn't that great . Will try the 9901 next time out .

And a 2032 pipe and medium header is PERFECT for your Novarossi. A little bit sad its very thin :-)

Get hold of Imbue in the Radiosistemi thread, He can get the 2032 in SS Version. 2032 is a blend between 2096 and 9901. Highly recomended. Good on fuelmilage too :-)

What would you recommend for a Crono RS-5. I am currently running a long square header/9886 pipe. I would think a 41021/2096 would be a good choice as well.

Is the NR 21-4T a good truggy engine? I can't keep up with all the 4-whatever engines.. If I recall, the BTT is the right one for truggy though, right?.. Anyway, have a chance at a deal on a 21-4T.., but mostly run truggy..

Um
 

If you are talking about a plus 4 or btt in a truggy then no.

I would personally prefer the plus 21-4c team in truggy over btts

Maxysfuel.com